Search: 98400   >  

Rick, according to Blue Ox the space between the bolt holes at the end of the Demco Tow Bar Adapter for Blue Ox Base Plates #DM9523041 is 1.63" ( 1 5/8") so it'd be a quarter inch larger, and should work fine for you.

The RoadMaster Falcon 2 Tow Bar, part #RM-520, will work with RoadMaster EZ, MX, XL or standard base plate kits. I would recommend part #1541-1 or 1541-3. These are the XL style and are compatible with more towbars than the MX style. If you do not…

As indicated in the provided photo, the holes in the removable drawbars of the Roadmaster #RM-521424-5 base plate kit accept a 3/4 inch diameter pin, such as part #RM-910029 so the holes are actually fractionally larger than 3/4 of an inch. According…

The red wire for the ICX transmitter in the Even Brake #RM-9400 connects to the cold side of the brake switch. This is the wire that only has power when the brake pedal is pressed. However, on a 2013 Chevy Equinox it is a little more complicated.…

If the vehicle you are towing with has separate stop and turn signals then it will need to be wired with a Modulite converter so that it can run the lights on the vehicle you are towing that does not have separate turn signals and stop lights. If the…

Rick, yes you are going to need to install the brake lite relay kit with your Roadmaster EvenBrake #RM-9400. The brake lite relay #RM-88400 is included so you should not need to buy another one. Roadmaster states in their instructions that diodes…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

There is a replacement motorhome monitor for your Roadmaster Even Brake Portable Supplemental Braking System #RM-9400, which is the following part: - RoadMaster Even Brake Motor Home Monitor #RM-9410 If the Jeep still has the ICX transmitter and the…

No, the Curt Universal Tail Light Wiring Kit for Towed Vehicles #C63CR is just to transfer your turn and braking signals from the motorhome through your towed vehicle so that drivers behind you can see them. To activate the brakes in your towed…

I have attached an installation video for the Roadmaster Even brake 2nd Vehicle Kit,part #RM-98400. This video explains how you run the wires for the breakaway kit as well as connecting the IXC terminal. When working with electrical connectors I…

Normally you can find the brake light switch under the dashboard at the top of the brake pedal. There could be a number of wires attached to the switch so you can use a tester like part #PTW2993 to test the wires. Since the auto manufacturers can use…

The break away switch used on the Roadmaster Even Brake and the Hopkins Brake Buddy are both open circuit-style switches, they're normally open until the pin gets pulled at which time the circuit closes and the unit actuates the vehicle brakes.…