The 2010 Chevy Silverado will have a wire bundle tucked up under the dash, to the left of the steering column, held together with a white tag. The tag should also have the wire functions on it but we have learned that they are as follows: Red/black…
The 84545 hub on your Stratos Trail Trailer uses the standard bearing combination for a 3,500 lb axle just like the #84545UC1-EZ and #84545BX. This means the correct bearing kit is the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb…
Hello Johnny, I really wish I had a list that told me everything that was put on every camper, but unfortunately such a list does not exist. You were looking at the Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome #LHSI60C, which is the…
Hello Jeffrey, While I'm sure we have a bearing kit for your car trailer, we don't have any way of knowing off-hand or cross-referencing what bearings you need. You mentioned you have them out, so you should be able to see the part number…
The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…
You can select your new hubs by matching up your axle weight rating, wheel bolt pattern and the bearings used in your current hubs. Based on my research your hubs are 10 x 2-1/4-inches, are from a 3500-lb axle and have the 5-on-4-1/2 bolt pattern. If…
The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
From your description the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-468-469 is exactly what you need. They fit with 10" hubs, are rated for a 3,500 lb axle, and they mount on a 4 bolt brake mounting flange with 2-7/8" spacing on…
The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…
The Replacement Hub Assembly for Demco Kar Kaddy #DM04369 is the only hub assembly we have for the Kar Kaddy's. There is no 5 on 4 bolt pattern, you likely already have a 5 on 4-1/2 bolt pattern. I recommend double checking the measurements. I…
Filters
