Broken Screw in Hole for Trailer Connector Bracket on Blue Ox Base Plate Kit

Question

Question:

Is there another way to attach the 6 way pole adapter to the blueox tow bar, there a broken screw in one of the poles and I have tried to take it out but it ain’t budging

asked by: Richard

0

Expert Reply:

Yes, you can use part # C92CR with part # 18140 to attach the 6-way trailer connector to your Blue Ox Base Plate Kit. The no drill bracket wraps around the bar via the band clamp and then the other mounting brackets attaches to that. This will be the only other option we have for you to secure your trailer connector unless you were to drill out the damaged screw on your base plate kit.

expert reply by: Conner L

0

click to enlarge

Answer 1

It sounds like you are looking for hardware to mount the Blue Ox 6-Wire, Coiled Electrical Cord with 6-Way, Round Plugs #BX8862 onto your vehicle. You could go to your local hardware store to find screws/bolts that will hold it to your bumper or…

view full answer...

Answer 2

Hey Matthew! That is the HK Offroad Shackle Tab Kit. Looking at their site they list them as 3/4" thick so you would need the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars #RM-035 along with the Roadmaster…

view full answer...

Answer 3

Hey Brian, congratulations on the new Wrangler! I would be happy to help you out with this. For a complete setup you will need a base plate kit, tow bar, safety cables, wiring, and a supplemental brake system. Roadmaster is going to be the best…

view full answer...

Answer 4

Hey Bill! You can definitely install the Curt RVi Series Shadow 2 #RVI94FR in your 2025 Jeep Wrangler. Do you have your tow bar, base plate kit, and wiring already picked out?

view full answer...

Answer 5

Hey Mike, for a 6-way mounting bracket you could use with the Pollak 6-way part #PK11609 you'd want the part #C92CR. What vehicle are you flat towing?

view full answer...

Answer 6

Hey Jerry, when installing the Roadmaster Brake Lite Relay part #RM-88400 the red wire runs to the running light circuit which is typically a brown wire. In the diagram it's being called the taillight circuit but that's same thing as running…

view full answer...

Answer 7

For your 2021 Jeep Wrangler, you actually can not splice into the brake wire. For this reason, you will want to use the Roadmaster Stop Light Switch Kit #RM-751490 instead. This kit will connect to an inline fuse to your vehicles positive terminal on…

view full answer...

Answer 8

We recommend at minimum a 14-gauge wire for providing 12V charging power to a towed vehicle's battery, such as that included in the Roadmaster Battery Charge Line Kit for Towed Vehicles, item #RM-156-25. Naturally, a heavier-gauge wire would do…

view full answer...

Answer 9

The Demco Tabless Base Plate Kit #DM9519336 that you referenced will work perfectly with your Blue Ox Avail Tow Bar as long as you add the Demco Adapter #DM9523127. The adapter is what will allow the tabless base plates to attach to the Avail Tow…

view full answer...

Answer 10

You do have a few options to get an electric winch, like the Dutton-Lainson StrongArm #TW4015, working, but the 4 Flat will not be able to do so alone. The first will be to add a battery to the trailer. This will usually be my suggestion, but as you…

view full answer...

Answer 11

Hey Anthony, it's pretty odd but the Curt tow bar wiring kit part #C59HR does not come with a mounting bracket for the 6-way so you would need to also go with the part #C92CR to mount it to the bottom edge of your front bumper.

view full answer...

Broken Screw in Hole for Trailer Connector Bracket on Blue Ox Base Plate Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching