Cross Reference a Replacement for a TCM 21334 TB Grease Seal

Question

Question:

can you cross grease seal # tcm 21334 tb

asked by: Charles

0

Expert Reply:

We sure can! The Transcom # TCM 21344 TB cross references to the 10-10 seal we offer, part # RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

expert reply by: Mike L

0

Answer 1

The TCM 21334TC Seal best cross references to our Grease Seal part #GS-2125DL which has a 2.125" inner diameter and 3.376" outer diameter. This seal is designed for grease lubrication.

view full answer...

Answer 2

The Replacement Converter #PD4655V is the correct converter for your Parallax 7355 power center. I do not see that WFCO shows their 8955PEC being acceptable to use with your Parallax 7355.

view full answer...

Answer 3

According to my research the Transcom part 21334TC is an oil seal with a 2.125" inner diameter and a 3.372" outer diameter and the Transcom part 2133TB is a grease seal with a 2.125" inner diameter and a 3.376" outer diameter.…

view full answer...

Answer 4

You can use the Timken Grease and Oil Seal #TMK98ZR in place of the Grease Seal #GS-2250DL. While they are not exactly the same seal construction it is still a double lip design and the dimensions are the same so they are going to fit correctly.

view full answer...

Answer 5

Hey Richard, the correct bearing kit you want is the part #BK3-210 based on the info you gave me. You listed all of the correct info so that makes it really easy to pick out! Sometimes 7k axles use different seals but you gave that info so I know…

view full answer...

Answer 6

Hey George, honestly not much really. The Timken brand like the seal part #TMK98ZR used to be associated with being made in the USA and higher quality but they aren't made in USA any longer so between that and the part #RG06-070 there's not…

view full answer...

Answer 7

Thank you for the picture! From that I can tell you have a B and W Turnoverball hitch installed in the bed of your truck and that the replacement ball part #BWGNXA2005 is exactly what you need. I attached a link to our return policy page but since we…

view full answer...

Answer 8

The Square Pipe Mount Swivel Jack #TJDP-7000S-B is a weld-on 7k trailer jack that would work well for you. The pipe mount would weld to the frame of the trailer and allow you to swivel up and down when needed. You should also note that our jacks are…

view full answer...

Answer 9

Hey Chandler, it looks like the Timken Bearing Kit, LM67048 Inner/Outer Bearings, LM67010 Inner/Outer Race, 203013 Seal #TMK96ZR are used on the Trailer Hub and Drum Assembly #8-201-5 which are for 5,200 lb axles.

view full answer...

Answer 10

Hey Lori, For your 2025 Toyota Corolla Cross I recommend the Draw-Tite #DT28GR. This is a great custom fit 2" hitch for your vehicle that requires no drilling in order to install. It offers a 300lb tongue weight capacity and a 2,000lb towing…

view full answer...

Answer 11

The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb axles…

view full answer...

Answer 12

Self-adjusting brake assemblies are the way to go like with the #AKEBRK-7-SA which do fit your 7k Dexter axles. The only real reason to go with manual adjust is really just cost. At one point the self adjusting models were much more expensive but now…

view full answer...

Cross Reference a Replacement for a TCM 21334 TB Grease Seal

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching