Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as easily.…
Hello Jeff, Thank you so much for the pictures, they are most helpful. Yes, the Dexter Trailer Brake Drum for 12,000-lb and 15,000-lb Axles - 12-1/4" x 5" - 8 on 6-1/2 #DX34XR is the correct dexter drum to replace your Lippert Drum Drum…
Whereas the Fulton #F142400 will work with just wire rope, like the #FWC3250100, the Fulton #F142401 will work with wire rope and also a strap, like the #FWS20HD0200. With both of these having a capacity of 2,000 ponds and being high performance 2…
The plug in the Replacement Breakaway Cable #BX2940931 that you referenced is a standard 1/8 inch stereo adapter like you mentioned. It's the same jack size as what headphones use. The jack is a TRS style of plug that has three different contact…
I attached a picture that has about every dimension you could want for the part #BD500217. The overall length is 17 inches and the diameter of the screw is 1-1/4 inches.
What you will want to do is measure the distance between the mounting holes on the frame of your truck to see if the Curt hitch part #C15300 will fit. If the holes are 36 inches apart on center then this hitch will fit and work well.
The Curt Trailer Hitch Receiver part #C15300 which is a fit for a 1977 Ford F-250 is designed for the factory gas tank. If you have an aftermarket gas tank then we would not be able to confirm fit but what I could do is provide you with the inner…
Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…
According to all of the information you gave me, it does sound like the Trailer Idler Hub Assembly for 3,500-lb Axles #AKIHUB-555-35-K will be a fit for your trailer. I did have trouble looking up specifics for the part numbers you sent in though so…
I did some looking around and it looks like the closest we carry to what you're looking for is the Z-Rail for Enclosed Trailer #362417-955. This rail measures 93-1/2" long x 2" tall x 1-1/2" deep but can be cut to fit your…
We can get you a replacement for your TDE LP75 disc brake actuator; that's a 7,500 lb actuator that accepts a 2" hitch ball, and the correct option will depend on if your trailer tongue is 3" wide x 4" tall or 3" wide x…
Filters
