Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, it will! I checked with Draw-Tite and I can confirm that their item #DT22MR fits all models of the 2024 Hyundai Tucson including your SEL Convenience Hybrid. Technically it'll fit the N-Line but it's not recommended from Hyundai to add a…
view full answer...The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…
view full answer...There are 2 sets of holes on the Reese adapter #RP30154 for Rams with the OEM prep package. The outside set of holes is 29 inches apart on center and the inner set is 20-1/2 inches apart on center. Front to back they are approximately 22 inches apart…
view full answer...Platform racks are definitely the easiest bike racks to load up since you really only need to get the bike about 20-25" off the ground, so you're on the right track with the style of rack that you're looking at. I really think…
view full answer...Yes, the Curt Class 3 Hitch #C94WR (13485) will indeed fit the 2024 Hyundai Tucson PHEV. I was able to confirm this directly with Curt. The #C94WR will fit all models of the 2024 Tucson, including the PHEV model. I have linked out install video below…
view full answer...The big difference between Swagman XC, #S64650, and the Swagman XTC-2, #S64670, is the XTC-2 is capable of handling bikes with up to 66 inch long wheelbases, while the XC can handle bikes with a wheelbase up to 51-1/2 inches. In my opinion, if given…
view full answer...If you check out the attached instructions for the Curt TriFlex Trailer Brake Controller #C24VV you can see that the OL code you are getting means that there is an "Overloaded output circuit, trailer brake system fault". Whichever…
view full answer...In the settings mode of the controller you can join the manifolds with the controller. To set the manifold into join mode locate the yellow join wire. It is the yellow wire with heat shrink on the end of it. Remove the cap leaving it attached to the…
view full answer...There is no specific torque rating for shackle bolts. Basically for the middle bolt there should be enough free play in the shackles to allow them to move. Tightening the shackle bolts too much will squeeze the shackle straps against the leaf springs…
view full answer...According to Curt, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2, part #C94WR, is compatible with all versions of the 2022 Hyundai Tuscon, including your Hyundai Tuscon Hybrid Limited.
view full answer...It's pretty simple. A 4-bolt rail uses four 5/8 inch bolts ran through the floor of the truck bed into the frame brackets. The bolts run down through the center of the raised part of the rail, as shown in the photo I provided. A 10-bolt rail uses…
view full answer...The only hitch that is compatible with the full size 20" spare tire on a 2023 Toyota Highlander is the EcoHitch Hidden Trailer Hitch item #EH35VR. This hitch is custom fit and bolts to your Highlander with included hardware. This is a class III…
view full answer...Filter Your Search
Contact and Help