The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…
Hey Scott! I recommend using the Hydrastar Marine Electric Over Hydraulic Actuator for Disc Brakes #HS381-8067. Hydrastar is a reliable, proven brand so it will serve you well. Then for brake lines you can use the Hydrastar Hydraulic Brake Line Kit -…
Hey Tony, welcome back! The Titan Zinc-Plated Brake Actuator item #T43329007K you purchased has a plunger you can access for purposes of bleeding the system of air. You will want to remove the plate that surrounds the breakaway lever to access it.…
Hey Justin, welcome back! The 136" measurement on the Parking Brake Kit #T2385201 is the overall length of the rear cable. It runs back roughly half that length on each side from where it runs through that central bracket. What kind of trailer…
Hey Darrel, to bleed the Dexter Zinc-Plated Brake Actuator #T43397007K that you referenced you would need to use a 2x4 and the safety chains to push on the coupler of the actuator to pressurize it. See attached picture and also the attached help…
Yes, since the hub you currently have has 8-247 stamped on it the Trailer Hub part #8-247-50UC3-EZ that you referenced would be the correct hub for you to use. This hub is 10 by 2-1/4 inch and has a 5 on 4-1/2 inch bolt pattern.
Hey Mike. The Deutsche Hydrapro Alpha G-1600 item #DH94FR and the DeeMaxx Alpha G1600 item #DE47SR have different fittings on them. The DeeMaxx actuator item #DE47SR has a brass fitting/valve that connects to the main brake line, whereas the Hydrapro…
Hey there Lorna. Yes, the Demco Drum Brake Actuator #DM28CV or Demco Brake Actuator Disc #DM33CV will 100% fit your 3" wide 4" tall trailer tongue. Even though the actuator says 3" wide and 2-1/2" tall, it will work because it…
The only real difference between using an integrated hub/rotor combo and a separate hub and rotor combo is that if something happens to the rotor and or hub on the separate hub/rotor, you can just replace the damaged component and not the entire…
Yes, the Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes #e58GR that you mentioned is the same thing as the Dexter 89-2 calipers that you mentioned and will work great as a replacement. These calipers will work great with…
Hey Eric, welcome back. The 3-1/8" Long Shackle Straps MORryde Suspension Upgrade Kit for Tandem Axle Trailers item #MR76ZR are going to be the longest option I have for a replacement wet bolt kit. They are compatible with Road Armour equalizers…
Hi Dan; those couplers are no longer around so we do not have a direct replacement. What you can do is pick up a piece of stock steel to extend the tongue and add a Fulton Fold-Away Coupler Hinge. Then you can add an actuator like the #DM72VR or…
Filters
