Search: Reese Gooseneck Ball   >   Gooseneck and Fifth Wheel Adapters   >   Lippert 1621HD  x   >  

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

The safety chain loops on your 2017 Ford F-350 with the factory puck system should be installed in the pucks closest to the tail gate. So if you were installing the Reese Elite Series Pop-In Ball Kit for Ford Super Duty #RP30137, which fits your…

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

I spoke to Lippert and was able to determine that you have a Lippert Rhino bolt pattern so the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box - Auto Latch - Lippert Rhino - 21K GTW - 3.5K TW #GY98GR that you were looking at would be a fit. Gen-Y…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

So the ideal amount of clearance between the trailer overhang and the bed rails of the truck is 6 inches while the trailer is sitting as level as possible. If your trailer sits perfectly level and you currently have 5 inches you probably will be fine…

Thanks for the pictures and congrats on the new trailer! You are correct the Gen-Y item #GY98GR would be the correct adapter for your Jayco Eagle. This system replaces the Lippert Rhino pin box and has the extra pin weight capacity you will need. I…

I was able to pull up a video of your 2022 Forest River Rogue Vengeance 4007 and in it I saw that your pin box is a Rhino box so the Gen-Y pin box adapter you'd want is the part #GY23GR which fits in place of the Rhino and has a hitch weight…

The Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #C32DR and part #C92DR are the exact same. This hitch is designed to attach to a gooseneck hitch and provide a connection for a fifth wheel hitch. Therefore, if you have…

Yes, you could weld the Reese Elite Series 5th Wheel Rail Puck Adapters part #RP30149 directly to your flatbed. However, there would be no real way to then formulate any sort of weight capacity for the system once done so. The pucks really need to be…

Yes, the pop-in style gooseneck trailer hitch balls are cross compatible between the different factory puck systems from Ford, Ram, GM, and Nissan. For this, we have a few options such as the Curt Pop-In Ball part #C60629 which has a rise built-in or…

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…