Search: trailer jack handle   >   Weight Distribution Hitch   >  

I attached a picture that details how to disassemble the Bulldog 12,000 lb jacks.

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

The foot on the inner tube on Pro Series trailer jack #PS1401480303 is attached, all one part, so you would not be able to add a wheel. None of the pipe-mount swivel jacks come with a wheel. Your best option would be to replace the jack with…

I found some photos of a Brenderup Horse Trailer online. It looks to use a unique jack, one I am not sure we have an exact replacement for. That said, I have attached for you below all of our side frame mounted jacks with a bolt-on install which you…

A solenoid that has 3 terminals total such as #PK5231201 grounds through the mounting hardware so it must be attached to a clean and corrosion free bare metal surface (if not otherwise internally grounded). A 4 terminal solenoid such as #PK5230701…

For starters, if your 2013 GMC Savana 2500 came with a factor 7-way trailer connector the the four wires you will need to install a brake controller like the Tekonsha Primus IQ Trailer Brake Controller part #TK90160 are already ran for you under the…

The position of the axle should dictate the position of the springs and hangers not the other way around. With that being said, in order to determine proper placement of the hangers you will want to take the the distance between the two eye holes on…

The spacing will depend on the axle diameter and on which particular spring hanger kit you use. If you have a 6000 lb 3 inch diameter axle, and you're using the #APT5 hanger kit which includes 7-3/4 inch equalizers and 2-5/8 inch shackle straps…

The torque requirements for leaf spring u-bolts depend on the diameter of the u-bolts that are being used. If the gross weight of your tandem axle trailer is 7,000 lbs, then you likely have two 3,500 lb axles. Typically 1/2 inch diameter u-bolts are…

If a tandem axle trailer only has one braking axle it will typically be the front axle. If you are looking to add an axle I recommend that you check with your local laws regarding trailer weights and braking axle requirements. Not all states allow…

The radius dimension of the Buyers Products Handle part #3370091405H is 14-1/2 inches.

Are you sure the measurement you took wasn't slightly off possibly? Here are the stud to stud measurements and the bolt patterns they represent. Most likely it's 5 on 4-1/2 inch as that is the most popular bolt pattern like the part #AM20365.…