Result: Tool Box Latch

My contact at Dee Zee said they do not offer a paddle handle latch lock for their toolboxes that allow removal of the key with the lock unlocked. But we do have non-locking handles such as #UWSNONLOCKING. I measured this item and the part #DZTBLATCH1…

I went out to our warehouse and tested the UWS Rod-Connector #UWSRODCONNECTOR with the Replacement Locking Latch for DeeZee Tool Boxes - Hook Style #DZTBLATCH1 to confirm they will work together.

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

Assuming that when you tested the resistance of the brakes you were testing the two wires on each magnet and getting 2.0 and 2.8 ohms the magnets on your trailer are not working correctly and will need to be replaced. For 7" brakes you should…

The spindle dimensions you have do not match any of the standard trailer spindles that are available so we do not have any hubs that would fit them. Honestly your best option is going to be to replace the axles. Installing new spindles is a…

After checking with B&W and the gooseneck hitch #BWGNRK1320 is confirmed to fit your 2022 Ram 2500 with RamBox. You will want to be careful of clearance issues with the trailer and bed rails though since the bed isn't as wide. That is more of…

In order to keep the two group 27 batteries on your 2016 Jayco Trailer maintained while in storage I recommend using the Go Power Eco Solar Kit part #34273837. This kit will provide your batteries with up to a 1.14 amp maximum power current which…

Based on my research Dexter seal 63052 appears to have been used in a military trailer application. I also could not find a current production seal that cross-references with this one. In this case the way to find a new seal is to measure the hub…

The bolt pattern of the Dexter Hydraulic Drum Brake Assembly #23-402-403 that you referenced is is 4.92 inch by 4.92 inch and the diameter of the bolt holes are .545 of an inch.

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

The wear plate in the Roadmaster #RM-2000-25 is 16" long x 8" tall and the holes are spaced 14-1/2" apart. The spacer plate is 4" long x 3" tall and 1/4" thick.

I attached a picture of the dimensions or the Lippert Door Window Frame part #LC363370 that you referenced. The size you have is the standard that this is designed to fit.