Review of Blaylock Industries Gooseneck Trailer Lock Kit - BLTL-53-40D2 Video

From the specs I pull up online, your AirXcel 48000 has a shroud measuring 38" x 26". Please verify this before placing order. The Classic Accessories RV AC Cover, #052963774108 will be a great fit with dimensions of…

Thanks for the picture of your Texas Pride Gooseneck. Based on that we know that the coupler lock part #BLTL-53-40D2 will fit and work great.

A simple to use, manual truck camper jack setup, I recommend the HappiJac Manual Truck Camper Jack System #LC736515-4. This kit comes with 4 camper jacks capable of lifting 11,200-lbs, and can lift to a maximum height of 36-1/2". This kit…

From what I could find online I think the Butler coupler is similar to the Bulldog/Stallion/Superior/TEM couplers so in that case you should be able to use the EZ Lock Gooseneck Coupler Lock Combo #BLTL-53-40D2 for your gooseneck trailer. This…

The physical difference in terms of appearance between various well-known gooseneck coupler manufacturers is hard to spot because they all are fairly similar. The biggest difference comes with the width of the coupler flange. The best way to…

I have a solution but I do not have a locking pin that is long enough. Instead the preferred method for locking your coupler to the trailer as well as preventing anyone hooking up to it without permission is the Blaylock EZ Lock Gooseneck Coupler…

The large round washer included with the #BLTL-51 measures 2 inches in diameter, the inner diameter is 13/16 of an inch and the washer is .139 thick. I'll provide a photo showing these dimensions.

If you need an axle replacement because one is damaged, you will be fine sticking with the 7,000 lb axles you currently have. All you would need to do is get the hub face to hub face measurement to choose the right axle length. We have 94"…

The MasterLock High Security King Pin Lock, Item #ML387, is not compatible with your Big Tex Gooseneck Trailer. The MasterLock is for fifth wheel trailers and will not work with gooseneck trailers. We do have some gooseneck locks like the the…

In order to choose the correct lock for your trailer, you will need to measure the outside diameter of the coupler and also the outside diameter of the lip at the bottom of the coupler. From there, I have linked the page with all of the gooseneck…

From what you are describing it sounds like you are used to towing a bumper pull trailer with your 2017 pickup. When towing with a gooseneck hitch like the B&W #BWGNRK1111 the turning point is located directly above your rear axle and not at the…

The correct lock for your Kaufman gooseneck trailer is the Blaylock EZ Lock Gooseneck Coupler Lock #BLTL-55-40D (which I confirmed with my contact at Kaufman). If you'd like a lock for the set screw as well then you can use the kit #BLTL-57-40D2…