Bolt Pattern of Mounting Flange of Dexter 9,000 lb Hydraulic Brake Assemblies
Updated 01/16/2019 | Published 01/15/2019 >
Products Featured in This Question
Question:
What are the mount bolt pattern dimensions for this backing plate? center to center horizontally and vertically
asked by: Roger
1
Helpful Expert Reply:
The bolt pattern of the Dexter Hydraulic Drum Brake Assembly # 23-402-403 that you referenced is is 4.92 inch by 4.92 inch and the diameter of the bolt holes are .545 of an inch.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Dexter Hydraulic Trailer Brakes - Duo Servo - 12-1/4" - Left/Right - 8K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Dual Servo
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: brake dust shield
- Search Results: primus brake controller
- Search Results: primus iq
- Shop: Dexter 12V KTI Hydraulic Pump - Single/Double Acting - 6 Qts
- Shop: Dexter KTI 12V Double Action Hydraulic Pump - 3 Qt Reservoir - PU/PD Remote w/ Manual Override
- Shop: Dexter Hydraulic Trailer Brakes - Duo Servo - 12-1/4" - Left/Right - 8K
- Shop: Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Shop: Dexter Brake Mounting Bolt for 8,000-lb to 9,000-lb Brake Assemblies
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Shop: Gooseneck Hitch
- Search Results: a91gb
- Search Results: gas shocks rv door parts
- Search Results: k71~773~02
- Search Results: gooseneck offset
- Q&A: Mounting Bolt Pattern and Center Hole Diameter For Dexter Trailer Brake Assemblies 23-248 and 23-429
- Q&A: 8,000 lb Electric Trailer Brake Assemblies That Measure 12-1/4 Inch x 3-3/8 Inch
- Q&A: How to Tell if 10K Dexter Nev-R-Adjust Electric Trailer Brakes Are for Driver or Passenger Side
- Q&A: Electric Brakes for Rockwell 8,000 lb Torsion Axles
- Q&A: Electirc Brake Kit AKEBRK-8 Dimensions and Slipper Springs for 9,000 Pound Axle
- Q&A: Can Standard Lug Nuts be Used With the Taskmaster TA69VR?
- Shop: Lift Assist
- Q&A: What Type of Lug Nut Should Be Used with a 17.5" Alcoa Wheel with 9/16 Wheel Studs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Fifth Wheel Hitch Combinations for Ram Trucks with RamBox (2009-Current)
- Article: Can You Flat Tow a Jeep Compass?
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices

