Result: knobs

Maybe its obvious, but I am not sure how I get these locking knobs to lock. Any help would be great? | Maybe its obvious, but I am not sure how I get these locking knobs to lock. Any help would be great? | To get the Locking...

If you're ok with losing your 12 volt outlet by your shifter you can use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-003 to install the knob. | I have been a long...

Including the Ford Style dash for the control knob. Thanks in advance. | I am interested on installing this controller on my 2020 Ford Ranger with factory tow package 7 pin. If I order this item, are there other parts I need...

If you check out the attached video of this controller being installed on a 2014 Jeep Grand Cherokee you can see that the control knob is actually mounted in the center console. Since the control knob doesn't have to be mounted in a specific orientation it really opens up the possibilities for installation. |

I have one space left in the dash slots, so I’d like to mount the brake controller knob there. What products/kits do I all need to add a brake controller with a dash knob and to change the existing 4-way flat on the OEM hitch to 7-way round + 4-way flat? |

From there you can use the knob to fine tune it. Below are some pictures of how people have mounted the knob and a link to an install video for a 2021 Range. | 2025 ford ranger no tow package. XL trim, spray...

I have been looking at Redarc and Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - Up to 4 Axles - Proportional - thank you | what brake controllers best fit a 2021 Ford Ranger Lariat with a factory tow package?...

The main unit installs behind the dash so only the control knob is visible. You can also use the Mounting Panel # 331-TPSI-002 to install the knob in a blank switch on the Highlander for a nice clean look. ...

This will allow you to install the control knob inside one of the knock out panels on your dash. | My 2019 Toyota Highlander came equipped with factory tow package including flat-4-way wiring. Can I install this product on...

The main unit mounts behind the dash so only the control knob will be visible. The knob controls the braking power, acts as the manual override, and has colored LED signals for diagnostics. | Hello, I have...

You will then be able to turn the controller knob fully counter-clockwise, press the brake pedal, double click the brake knob twice within 1 second and then release the brake pedal this will change the light from blue to green. |

The main unit mounts out of site so only the control knob is visible in the cab. The knob controls the braking power and also acts as the manual override. | Do you have a 7 pin flat trailer wire harness for...

To install the Redarc Tow-Pro Liberty on your 2019 Toyota Highlander you'll need the following parts: Tow-Pro Liberty - # RED24FR Pigtail Wiring - # RED69FR Universal Wiring Kit - # ETBC7 Mounting Panel for Control Knob - # 331-TPSI-002 The universal and pigtail wiring gives you everything needed to install the brake controller and then the mounting panel enables you to mount the control knob into one of the knockout panels on your dash. |

The main unit can be mounted in any position, and the control knob mounts in the dash of your vehicle. The knob uses a colored LED for diagnostics and works as a manual override when pressed. | I was looking...

This brake controller allows you to mount the main unit out of sight with the knob mounted in the dash. The knob allows for quick and easy adjustment and also functions as a manual override. | Can I use the...

I pushed the Redarc brake controller knob in, and I still got 12V. It should have been 0V. | I installed the Tekonsha 7-way wiring ITEM 22119 with the Redarc brake controller ITEM RED52VR. 2017 Toyota Highlander Hybrid I...

It is the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-002. | I have a 2017 Toyota Highlander with a factory tow package including a flat-4 wiring connector. Id like to convert to a...

The integrated tightening knob of the Apex allows you to simply tighten the knob once you put the bike rack in the hitch and then lock it with the included keys. | Hi, I have a 2018 Highlander XLE. What are...

Yes, there is a square option for mounting the control knob of the Redarc Tow-Pro Liberty item # RED24FR. | The mounting panel for 331-TPSI-002 appears to be rectangular. The 2021 Toyota Highlander has square “blanks” in the...

In the video you can see David easily completes the installation with the most difficult part being when he pops the 12v outlet out to replace it with the knob for the controller so that he doesn't have to drill a new hole in the dash to install the knob. |

The main unit installs behind the dash so only the knob is visible. The mounting panel will replace one of your knockout panels giving the brake controller installation an OEM look. | I want to wire a 2010 Highlander for...

The only other thing I recommend is a mounting panel for the knob, and the right one for your Highlander is part # 331-TPSI-002. | I have a 2015 highlander hybrid with no trailer hookups whatsoever. I need a 7 pin for my new...

If you don't already have a brake controller I recommend checking out the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR because it uses a simple LED light for setting adjustments and it installs out of the way so only the small control knob is visible. Redarc actually has the Mounting Panel # 331-TPSI-002 you can use to mount the control knob in an unused port on your dash for a total OEM look. |

-Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional RED52VR -Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob 331-TPSI-002 -Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires ETBC7 Thank you |