2012 Ford Fiesta Roof Rack

Features:

This roof rack mounts to your vehicle in seconds with 6 vacuum cups. It's easy to transfer from vehicle to vehicle, and it removes easily for convenient transport and storage. Round, aluminum crossbars carry kayaks, skis, and other gear.

Installation Notes:

This system utilizes 6 vacuum cup attachments to secure itself onto your vehicle's roof

Features:

This roof rack mounts to your vehicle in seconds with 6 vacuum cups. It's easy to transfer from vehicle to vehicle, and it removes easily for convenient transport and storage. Round, aluminum crossbars carry kayaks, skis, and other gear.

Installation Notes:

This system utilizes 6 vacuum cup attachments to secure itself onto your vehicle's roof

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This roof rack mounts to your vehicle in seconds with 6 vacuum cups. It's easy to transfer from vehicle to vehicle, and the bars fold in half for convenient transport and storage. Round, aluminum crossbars carry kayaks, skis, and other gear.

Installation Notes:

This system utilizes 6 vacuum cup attachments to secure itself onto your vehicle's roof

Features:

This roof rack mounts to your vehicle in seconds with 6 vacuum cups. It's easy to transfer from vehicle to vehicle, and the bars fold in half for convenient transport and storage. Round, aluminum crossbars carry kayaks, skis, and other gear.

Installation Notes:

This system utilizes 6 vacuum cup attachments to secure itself onto your vehicle's roof

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

This locking, removable roof rack mounts easily to your vehicle's naked roof with custom-fit clips. Its unique, elliptical design gives it a low, aerodynamic profile. Aluminum crossbars include T-slots for mounting Rola carriers and accessories.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These Euro-style, steel crossbars work with Rhino-Rack legs to create a sturdy roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories. Black powder coat resists corrosion.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These Euro-style, steel crossbars work with Rhino-Rack legs to create a sturdy roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories. Black powder coat resists corrosion.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These quiet, aerodynamic crossbars attach to Thule foot packs to create a stylish roof rack for your vehicle. Dual rubber strips in T-tracks let accessories slide into T-tracks - no need to trim. Simply raise pivoting endcaps to access T-track.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Features:

These quiet, aerodynamic crossbars attach to Thule foot packs to create a stylish roof rack for your vehicle. Dual rubber strips in T-tracks let accessories slide into T-tracks - no need to trim. Simply raise pivoting endcaps to access T-track.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Features:

This locking, removable roof rack mounts easily to your vehicle's naked roof with custom-fit clips. Its unique, elliptical design gives it a low, aerodynamic profile. Aluminum crossbars include T-slots for mounting Rola carriers and accessories.

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

These quiet, aerodynamic crossbars attach to Thule foot packs to create a stylish roof rack for your vehicle. Dual rubber strips in T-tracks let accessories slide into T-tracks - no need to trim. Simply raise pivoting endcaps to access T-track.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Features:

These quiet, aerodynamic crossbars attach to Thule foot packs to create a stylish roof rack for your vehicle. Dual rubber strips in T-tracks let accessories slide into T-tracks - no need to trim. Simply raise pivoting endcaps to access T-track.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Features:

Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Features:

Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Economically priced, removable roof rack clamps to your vehicle's naked roof. The square, steel crossbars can accommodate a variety of accessories such as bike racks, ski carriers and cargo baskets. Included locks secure the rack to your roof.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

Economically priced, removable roof rack clamps to your vehicle's naked roof. The square, steel crossbars can accommodate a variety of accessories such as bike racks, ski carriers and cargo baskets. Included locks secure the rack to your roof.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

These steel load bars attach to Thule foot packs to create a sturdy, convenient roof-mounted rack. Durable, polymer-coated steel resists corrosion and provides grip for your cargo. Full-length bars simply slide onto foot packs for easy installation.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Features:

These steel load bars attach to Thule foot packs to create a sturdy, convenient roof-mounted rack. Durable, polymer-coated steel resists corrosion and provides grip for your cargo. Full-length bars simply slide onto foot packs for easy installation.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use