Lift Kit Recommendation for Starcraft Satellite 17RB Travel Trailer

Question

Question:

My Starcraft Satellite 17RB has some design flaws related to the the suspension. Chiefly, the travel of the suspension is greater than the distance between the tire and the fender, resulting in bottoming out the fender and in my case where the fender started coming off of the vehicle due to poor road conditions. I field repaired it. However, most of the articles posted regarding lift kits refer you to an Over-Under conversion kits which increases the height by up to 6. This would be too much lift for my Satellite 17RB. whereas I am only looking to increase the height by about two inches to gain some additional clearance. Would the following be an acceptable solution? Torflex Lift Kit - Single Axle - 2-5/8inch Lift

asked by: Charles

0

Expert Reply:

The Dexter Torflex Axle Lift Kit # K71-707-01 will only work if your Starcraft Satellite 17RB has a #10 Dexter Torflex 2-5/8" axle, and this kit will provide 2-5/8" lift for your travel trailer.

Alternatively, Dexter Trailer Springs Over/Under Kit for 3" axles # K71-385-00 won't work if you have a Torflex axle- so it's important to know what kind of axle you've got on your trailer. If you actually have a 2-3/8" round axle, this might potentially be an option, since it would potentially bring your lift into the 4" range.

If you can tell me what type of axle you have and the diameter of it, I can recommend which solution is going to work best for you in this case. It also may be worth measuring the height of your spring stack while you're down there just so we can get that information too.

The most difficult option to accomplish a lift would be cutting off your hangers and changing them all out for some taller ones. This also could be an option, but as I mentioned, it's going to involve a bit of welding work.

You'll want to check the axle sticker/plate on your trailer axle to determine what the specs are. If you can send me a picture of that I can confirm what you have and what lift kit is going to keep you from bottoming out in the future!

expert reply by: Erik B

0

Answer 1

My research indicates that your Flagstaff 176ED used a 3500 lb axle with a leaf spring suspension. The #LC382741 riser kit is designed for a torsion axle, and wouldn't work with a leaf spring suspension. If your suspension is currently set up so…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 8

Yes, David you are correct. The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item #RED82CR is exactly what you need. Since your 2024 Toyota 4Runner came with a 7-way connector, the plug and play adapter included with item #RED82CR will…

view full answer...

Answer 9

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

Answer 10

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 11

Hey David welcome back! I would mount the rubber hoses on the side of the frame, for the Kodiak Hydraulic Brake Line Kit item #20TA-BLKIT. To attach the line holders, I recommend the Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc item…

view full answer...

Answer 12

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Lift Kit Recommendation for Starcraft Satellite 17RB Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching