Can 4k Axle Trailer Leaf Springs be Installed on 2019 Jayco Jayflight 267BHSW
Updated 03/17/2025 | Published 03/04/2025 >
Question:
I have a 2019 jayco jayflight 267BHSW. It has tandom 3500lb axles and GVWR is 7500lb. Can I upgrade to 2000lb Springs? Or should I stick with the 1750lb Springs?
asked by: James
0
Expert Reply:
Hey James, you can go with a 4k axle leaf spring like the part # e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so you should verify that is length you have. If you have something different let me know below.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: trailer suspension parts
- Shop: RV Camera
- Search Results: heavy duty shackle kit
- Search Results: shackle links trailer suspension parts
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: morryde trailer suspension parts
- Search Results: bronze bushings
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Article: Anti-Rattle Devices
- Shop: Tent and LED Strip Mounting Rail for Thule Hideaway Awnings TH620001 and TH620002
- Search Results: wheel bearings
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR29ZR
- Video: A Closer Look at the Lippert AP Kit
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Video: Review of Thule RV Awnings - TH301664
- Video: In-Depth Review of the B and W Anti-Rattle Clamp for 2-1/2" Hitch Receivers
- Q&A: What Is The Difference Between The etrailer e54SR And Dexter DX23CR Leaf Springs?
- Q&A: Where is 4-Leaf Double-Eye Spring # e22YR Made
- Video: Review of Steele Rubber RV Air Conditioner Rubber Gasket Qty 1 - SR73MR
- Video: Ultimate Overview of the Leaf Spring Bushing
- Video: Feature Review Dexter Single Axle Heavy Duty Suspension Kit
- Shop: Spare Tire Cover
- Q&A: What Size Trailer Rim Should be Used for a 205/75-15 Trailer Tire
- Q&A: Comparing Spoke and Mod Trailer Wheels
- Q&A: Can 3500 lb Leaf Springs Be Upgraded to Heavier Duty for a 2020 Grand Design Imagine 2400BH
- Q&A: Replacement Wet Bolt and Bronze Bushing For a 2022 Grand Design Imagine 2800BH With MORryde CRE 3000


James
3/15/2025
Hi Jameson, I have measured my leaf springs unloaded, they are 4 leaf, 1.75" wide, and appear to be 25.5" long eye to eye. Now I did only remove one tire and lower the jack to relax the spring. Do you think that I did not get an accurate measurement doing it this way? What springs would you recommend for my application? I would like to go to the 2000lb if possible.