Does Spray-In Liner Change Measurement When Installing Gooseneck Hitch On 2009 GMC Sierra

Question

Question:

I have a spray-in bed liner on my short bed gmc 1500, will the measurement be different than what is specified in the instructions?

asked by: Tom W

0

Expert Reply:

Since the measurement needed when installing the Underbed Gooseneck Hitch, part # C615-632 requires you to measure from the rear of the truck bed, you will need to make sure you measure the distance taking into account the spray liner if it is on the back edge of the truck bed.

If it is 1/8 of an inch you need to add that 1/8 inch to the measurement for the 4 inch hole to be drilled in the truck bed.

expert reply by: Jeffrey L

0

Answer 1

For a 2014 Chevy Silverado 1500 with a 5-1/2 foot bed we do have the Curt gooseneck hitch #C615-632 as a confirmed fit but the B and W Turnoverball #BWGNRK1057 that you referenced only fits the 6-1/2 foot bed version of your truck. The 8 foot bed…

view full answer...

Answer 2

If you look at the first page of the linked "alternate" installation instructions for the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit #C615-632 you will see that it has a few different bed length options.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Thanks for reaching out Jason. Yes, the shank (drawbar) included with the Weigh Safe True Tow Weight Distribution Hitch #WS26WR can be installed in either the drop or rise position. I've included a screenshot from the installation instructions…

view full answer...

Answer 9

Yes we do, I attached a picture that shows the installation instructions for the Timbren Front Suspension Enhancement System #TGMFK15CA that you referenced.

view full answer...

Answer 10

Hey Steven, yes the Curt gooseneck hitch part #C44NQ does fit your 2019 Ford F-250 that has the brackets on the frame rails already for the OEM gooseneck hitch.

view full answer...

Answer 11

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 12

Hello Graham, thanks for reaching out. So far I have been pretty impressed with the PacBrake air bags. I would say they are in line with the quality of the Air Lift air bags. They use similar top plates. Pretty much everything about the design of…

view full answer...

Does Spray-In Liner Change Measurement When Installing Gooseneck Hitch On 2009 GMC Sierra

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching