Availability of Mud Flaps for 2011 Acura RDX

Question

Question:

Hi, Im looking for a long rear mud flaps for my 2011 RDX. Does this fit my RDX or do you have other suggestion.

asked by: Giang T

0

Expert Reply:

The mud flap option we offer for the 2011 Acura RDX is a general-purpose kit like the Husky Liners Universal-Fit Molded Mud Flaps Set # HL56331. This is a 2-piece (front or rear) kit that includes fasteners and that is intended for larger vehicles.

The flaps themselves measure 11-3/4- wide x 17-5/8-inches long. This may be a bit too large for your RDX - but you can decide this for yourself. Do note that we also offer smaller universal-fit mud flaps such as the DeeZee Universal-Fit Plastic Mud Flaps # DZ17939 which measure 11-inches wide x 15-inches long. Husky also offers a smaller set, part # HL56261, which measure 9-3/4- wide x 15-3/4-inches long.

Drilling is required for installation of all of the referenced products.

expert reply by: Adam R

0

Answer 1

For your 2011 Acura RDX, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #56008 may require an extra fuse to be added, but it does not require a dealer. You can see in the attached video of the 2015 model where that…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi Dan! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13397 you were looking at is the hitch I recommend for your 2026 Honda CR-V Hybrid. This will actually fit the Hybrid and Non-Hybrid models, so you are perfectly good to go…

view full answer...

Answer 6

Hey Napoleon! The perfect hitch for your 2026 Honda CR-V Hybrid Sport is the etrailer #e98848. This is a Class III hitch with a bolt-on installation and a limited lifetime warranty. It also features a matte black finish which blends well with OEM…

view full answer...

Answer 7

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Answer 8

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Answer 9

Hi Deb! There are quite a few hitches available for your 2025 Honda CR-V Hybrid and I have the 2" receiver options (best size for what you are wanting) listed below with their corresponding weights. Curt Trailer Hitch Receiver - Custom Fit -…

view full answer...

Answer 10

Hi Rob, both the etrailer hitch part #e98848 and the EcoHitch part #EH25KR will install and function properly on your 2026 CR-V Hybrid Sport Touring, so you’re not risking choosing a hitch that won’t work. Both hitches use a hidden cross tube and…

view full answer...

Availability of Mud Flaps for 2011 Acura RDX

Products Featured in This Question

Continue Researching