Hub and Spindle Recommendation for a Custom ATV Off Road Trailer

Published 10/16/2014

Question:

I am having a double axle ATV off-road trailer built. I would like to mount the same size ATV tires and rims as I have in the back of my 2013 Honda Rincon AT 26X11R14 with Maxxis Bighorn 2.0 on ITP rims. What kind of hubs and spindles would I need so that I can mount my ATV rims and tires on the trailer? They should have a weight capacity of lbs. 2000. If you have this in store, I would need 4 sets. Thanks for your help.

asked by: Matthias R

Expert Reply:

In order to use the same wheels from your ATV on your off-road trailer you are going to first need to determine what bolt pattern you have on your wheels and then be sure to get the correct hub to match. If you are unsure of what bolt pattern you have on your trailer check out the link I attached to the right.

Since it sounds like you don't have hubs or spindles yet for the axles what you will need to do is check out the link I attached that shows all of the hubs we offer. You will need to select the bolt pattern you want from the filters on the left side of the page. This will show you all of the hubs that will fit your wheels. I would recommend you get one properly rated for what your trailer needs in terms of capacities.

On most of the product pages for the hubs there will be a section on the right side of the page that has related products. There should be a spindle there that would work with the hub you pick out.

expert reply by: Jameson C