Trailer Wiring Harness for 2015 VW Golf TDI

Question

Question:

what would be the right trailer harness for a 2015 golf TDI? thanks

asked by: Michael

0

Expert Reply:

The correct wiring harness for your 2015 VW Golf TDI is the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT.

expert reply by: Mike L

0

Answer 1

To equip your Golf for towing, I would recommend the Draw-Tite Class I receiver, part number 24825. The Tekonsha #119250KIT is the recommended trailer wiring harness for the 2011 Golf. You would also need the appropriately sized trailer ball, part…

view full answer...

Answer 2

I have just the trailer hitch for your 2014 Volkswagen Golf. Take a look at the Draw-Tite Trailer Hitch #24825. This fully welded, corrosion-resistant hitch receiver is perfect for your light-duty towing needs. This hitch does not require fascia…

view full answer...

Answer 3

There is a trailer hitch that fits your 2011 VW Golf Wagon TDI, but the Curt hitch you referenced will not fit the TDI models (additionally, there is no difference between the hitches, the 11474 is simply the replacement for the 11072 so they are…

view full answer...

Answer 4

While I don't know the color code for the wiring on your 2019 Volkswagen Golf SportWagen, the ZCI Circuit Protected Vehicle Wiring Harness #119250KIT should have come with a circuit tester so you can use the probe to see what wire carries which…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I reached out to my contact at Tekonsha and there are a few things that could be causing the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit #119250KIT you installed on your 2014 Audi AllRoad to have…

view full answer...

Answer 8

Hi Dennis, your request is proving to be more difficult than I assumed it was going to be. From what I could ascertain, you have 2 to 3 options for your 2025 Chevy Equinox without the tow package, which I have listed out below. First, you can use the…

view full answer...

Answer 9

Hey Bjorn, We do have a wiring harness for that 2019 Model 3. Along with that hitch, #EH84GR, I recommend the wiring harness #119250KIT. This is going to give you a 4 flat connection at the rear of the vehicle, and better yet it is a plug and play…

view full answer...

Answer 10

I do have an option for you but there are currently no custom fit trailer wiring harness options for a 2023 Chevrolet Bolt EV. That said, we do still have a way for you to setup the vehicle with trailer lights without splicing and that's with the…

view full answer...

Answer 11

Hey Theo, The only difference between #119251 and #119250KIT is that the #119250KIT comes with a circuit tester included. In my opinion, installation will be pretty difficult without the tester , and it happens to be the cheaper one. I recommend…

view full answer...

Trailer Wiring Harness for 2015 VW Golf TDI

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching