Can the Dutton-Lainson Worm Gear Hand Winch with Hex Drive # DL11001 Be Mounted Vertically

Question

Question:

Can the DL11001 be mounted on a vertical pole or does it need to be mounted flat?

asked by: Gary S

1

Helpful Expert Reply:

Yes, the Dutton-Lainson Worm Gear Hand Winch with Hex Drive # DL11001 that you referenced could be mounted vertically like on the post that you referenced.

I attached a review video for this winch for you to check out.

For cable you might also be interested in the Hand Winch Cable with Safety Hook # DL24104.

expert reply by: Jameson C

1

Answer 1

Hi Michael! Yes, you can add the BTBRV Trailer Jack Foot Scale #BTBRV014 to your etrailer Electric Trailer Jack #e23ZV. Simply pull the pin and swap out the foot with the scale whenever you want to measure your tongue weight. Then swap it back and…

view full answer...

Answer 2

Hello Jon. The only hand winches we offer that can be powered by a drill are the worm gear winches like part #DL11001. This has a hex drive, and you can use a 5/8" socket to operate the winch. You can use this with the Winch Cable #DL24104. I do…

view full answer...

Answer 3

The only hand winches we offer that can have a drill attached to them for operation are worm gear winches like part #DL11001 which does have a hex drive and you can use a 5/8 inch socket attachment to power the load in or out.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Can the Dutton-Lainson Worm Gear Hand Winch with Hex Drive # DL11001 Be Mounted Vertically

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching