Availability of Replacement Hardware for Curt Class III Hitch # 13650 on 2008 Ford Escape

Question

Question:

I have a used curt 13650 hitch and I want to put it in my 2008 ford escape now existing hitch. Do you sell the mounting kits separately...Id also buy the escape specific electrical harness from you too....cheers, Dean

asked by: Dean R

0

Expert Reply:

We can provide emplacement hardware to install a Curt # 13650 Class III hitch on your 2008 Escape. You would use part # RHK. On the product pate, type the hitch part number into the provided field, choose Curt from the drop-down menu and choose a quantity of 1.

I've linked you to an install video showing the hitch being installed on a 2009 Escape. The procedure on your 2008 would be identical.

expert reply by: Mike L

0

click to enlarge

Answer 1

You will need to order a Replacement Hardware Kit #RHK. Once on the product page you will select Curt from the drop down box and put in the hitch number as 13650. This will give you the hardware you need for your Curt Trailer Hitch Receiver #13650.

view full answer...

Answer 2

We do have replacement hardware for the Curt #13650. The bolts are easy to come by, but since you need the square hole spacers you'll have to get the entire kit. What you need is the Replacement Hardware Kit for Trailer Hitches #RHK. Enter the…

view full answer...

Answer 3

The 6 bolts you should have received with the Curt Trailer Hitch Receiver #13650 are 1/2-13 x 1 3/4 carriage bolts with the 1-3/4 number meaning the total length of the threaded bolt. This isn't a common issue with the bolts not working but you…

view full answer...

Answer 4

We do sell replacement hardware for all of the hitches we carry with the part #RHK but you might check down in the hitch tube to see if the hardware is taped up in there as that's sometimes where it's stored in shipping.

view full answer...

Answer 5

To properly measure your leaf springs you'll want to lift the trailer by the frame to take the weight off of the suspension and then measure from the center of the eyelet straight across the spring to the end of the slipper (pictured below). From…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Availability of Replacement Hardware for Curt Class III Hitch # 13650 on 2008 Ford Escape

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching