Can Parkit360 Force "Jackknife" Trailer For Maneuvering On Driveway
Updated 10/14/2026 | Published 10/11/2026 >
Question:
I have 2 dual axle trailers. A steel fly bed and a 7x14 enclosed trailer. Both need to be jackknife onto my driveway. The street I’m on is 32 feet wide and I block it while maneuvering the trailers. Will the parkit 360 jack knife the trailers onto my apron. The fly bed is always empty once I get home with it. The other trailer has tools and materials in it.
asked by: Larry G
Expert Reply:
Hey Larry! Yes, the Parkit360 Force Electric Trailer Dolly # PA46VR will allow you to maneuver your trailers into your driveway without having to use your tow vehicle. You can position the dolly at a sharp angle to the trailer tongue, essentially what would be a jackknife position with your truck, giving you a lot more flexibility when maneuvering in tight spaces.
Depending on the layout of your driveway, you may have to work back and forth a little to get the trailers positioned where you want them. You'll also free up a lot of space on your street by eliminating the tow vehicle, making it easier to maneuver without blocking traffic. The Parkit360 can handle trailers weighing up to 10,000 lbs, so you'll just need to make sure both trailers fall within that capacity.
Do you know approximately how much each trailer weighs?

Rhino
10/13/2026
In agreement with eveything Gene said. I have 19 foot Airstream and have to take the foot off to make tight turns or it rubs on the tires. My only issue is my driveway apron is 5% and the trailer wheels get stuck in the gutter. The tires on the Parkit360 just spin and will not pull the trailer up the slope. I now have to put wood down to cut the apron angle. I also had the SuperHandy, but had less control, so I switched to the Parkit360.

Product Page this Question was Asked From
Parkit360 Force Electric Trailer Dolly - 2" and 2-5/16" Hitch Balls - 10,000 lbs
- Trailer Dolly
- Electric Dolly
- 10000 lbs
- 20 Inch Tall
- 2 Inch Ball
- 2-5/16 Inch Ball
- Parkit360
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Tow Dolly for a 8,800 lbs Travel Trailer
- Q&A: Will Parkit360 Force Electric Trailer Dolly Work On An Incline?
- Q&A: Recommended Third Wheel Adapter for Parkit360 Force Electric Trailer Dollies
- Q&A: Recommended Battery Cables to Connect a ParkIt 360 Dolly to a Trailer Battery
- Q&A: Difficulty Turning w/ the Parkit360 Force Electric Trailer Dolly
- Q&A: Availability Of Electric Trailer Dolly That Can Handle 7%-11% Grade
- Q&A: Will the Parkit360 Force Trailer Dolly Work to Move a Trailer From the Street to the Driveway?
- Article: Trailer Wiring Diagrams
- Article: What Do I Need To Tow A Trailer?
- Article: Spring Towing Readiness Checklist
- Article: What To Look For When Buying Ratchet Straps
- Article: Practice Safe Trailer Towing with These 4 Tips
- Article: How to Measure for Trailer Hitch Drop
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub



Gene
10/13/2026
Hi Larry, The Parkit360 will definitely be able to jack knife your trailer. I have a 27 foot travel trailer. The only caveats are, I need to remove my foot for my electric jack, otherwise it may interfere with the Parkit360 wheels (tires). Also, you need to put a little weight into turning the Parkit360. I usually just push my hip into the steering bar, it’s easier than trying to manhandle it with just your arms. One other consideration, if your street. Is paved probably no problems at all, providing you are not fighting a grade more than 6 degrees. However, if you are on a gravel road you could run into some challenges, because there is a possibility of wheel slippage. Overall, I love the Parkit360; I can position my trailer with relative ease. One last consideration, make sure you purchase the appropriate unit for the tongue weight and weight of your trailer.