Can Spring Bars On Old Draw-Tite Weight Distribution System Be Upgraded/Replaced
Updated 06/18/2020 | Published 06/16/2020
Question:
Have a new Camper and old weight distribution hitch with sway control. Hitch is a Draw-tite. The label on ball currently is up to 12,000 lbs. and can support 1,200 lbs. of toung weight, New camper has toung weight of 1075. Current hitch has trunnion spring with an 800 lb. rating. Can I just replace my 800 lb. trunnion springs on this hitch with say 1,200 lb springs? And do you sell replacement springs for Draw-tite hitches?
asked by: Bob Y
Expert Reply:
It is certainly possible to upgrade or downgrade for that matter the spring bars on a weight distribution system. That said, this is not an option for all weight distribution systems with the main factor being age and parts available.I am not sure which exact model you have as Reese/Draw-Tite make several and the correct springs bars will be based on said model. I can say that most of the newer systems are branded as Reese so there is a good chance the spring bars for the older Draw-Tite system are no longer available.
The best option we can offer with this in mind is a new complete system, the Husky Center Line Weight Distribution System part # HT32218 is a great, complete, cost effective option.
Continue Researching
- Search Results: replacement spring bars
- Article: Overview of Lubricating Grease
- Video: Hands-On with the Replacement Spring Bar for Curt MV Weight Distribution System
- Q&A: 600 lbs Replacement Round Spring Bar for a Curt MV Weight Distribution System
- Shop: Replacement Spring Bar for Curt MV Weight Distribution System - 600 lbs TW
- Shop: Replacement Spring Bars for Blue Ox 2-Point Weight Distribution System - 1,200 lbs TW - Qty 2
- Q&A: Diameter of Curt Round Bar Weight Distribution Spring Bars
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
- Q&A: Are Curt Weight Distribution Spring Bars Compatible with an EAZ-Lift V-5 Weight Distribution Head
- Q&A: Are Spring Bars of Curt MV Weight Distribution Systems Interchangeable
- Q&A: Can Lower Rated Spring Bars Be Used on Curt MV Weight Distribution System # C17063
- Q&A: Length and Diameter of Curt MV 600 lb TW Spring Bar
- Q&A: Replacement Spring Bars For A Curt Weight Distribution Hitch
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2-1/2" Hitch - 15K GTW, 1.5K TW
- Video: Comprehensive Review: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2-1/2" Hitch