RV Storage Cover Recommendation for 2026 Brinkley Z3100

Question

Question:

I have a 2026 Brinkley Z3100. Dimensions say 34 ft 9inch so should I do the 34foot Adco or the 37foot just to make sure its going to fit?

asked by: Matthew W

0

Expert Reply:

Hey Matthew, based on the length of your 2026 Brinkley Z3100 being right at 29 feet I would actually recommend going with the Adco SFS Aquashed # 290-52256 which is for fifth wheel campers that are up to 31 feet in length. Going with a 34 or 37 foot length would be excessively long and wouldn't fit well so it would be better to go with the 31 foot option that more closely matches length of your camper. Are you putting your camper in storage for the year? This cover will do a great job protecting it in all climates and it has zipper access panels on the sides in case you need to get into it.

expert reply by: Jameson C

0

Aquashed Cover
(click to enlarge)

Matthew W.

8/10/2026

According to Brinkley website my Z3100 is 34 ft 9 inches. That’s why I was thinking the 37 ft Yes I’ll be storing it for the winter.

Jameson C.

8/10/2026

@MatthewW oh sorry, our systems cut off your dimension and made it look like you had a 349 inch length and not 34 foot 9 inch. That changes what you need as being the part # 290-52256 instead.

Todd W.

8/11/2026

This is the second cover like this we have bought and they are great easy to use and hold up great in all weather I actually have a new one still in the box. Excuse we sold this camper before we got a chance to use the cover

Jameson C.

8/11/2026

@ToddW thanks for sharing that!

Lee

8/11/2026

Do the 37 they don't stretch and you also have to allow for ladder.

Jameson C.

8/11/2026

@Lee what RV do you have and what size did you go with? These are supposed to have the added length of the ladder built in.

Lee

8/11/2026

@JamesonC My rig is 34ft 7inch Fit the front then the extra hangs off the back and is easy to tuck in

Jameson C.

8/12/2026

@Lee good to know thanks for sharing!

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Answer 5

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 6

Hey there Trace! There are parts of the steel brackets that come into contact with the aluminum bed on your new 2026 F350 Super Duty (congrats on the new truck by the way - those are super nice!). B&W says to use strips of polypropylene tape…

view full answer...

Answer 7

Hey Travis! The right MORryde GooseTech depends on the pin box bolt pattern and GVWR of the Solitude 310GK. If it is a little older it probably has a Lippert 1621, I believe the newer models use the Lippert Rhino. You can ask whoever you're…

view full answer...

Answer 8

Thanks for reaching out Kaiya, happy to help! For the 1998 Chevy C1500 Stepside, drilling is not required to install the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-FMC2576. On Stepside models, the cover uses the factory…

view full answer...

Answer 9

Welcome back John! I'm going to need a bit more information to confirm the MORryde GooseTech item #MR57MV is the correct one. I checked with the manufacturer and your 2024 Dutchman Astorian 230ML 5th wheel trailer comes standard with a Curt…

view full answer...

Answer 10

Hey Sean, welcome back! We do have a video showing the B&W Turnoverball #BWGNRK1320 being installed on a 2022 Ram 3500. I have provided a link to the video below. We don't have any videos showing how to remove the factory puck system though,…

view full answer...

Answer 11

Hey Clarendon, you're on the right track. You’re not wrong in how you’re thinking about this. You’re coming off a Flex Air, which is about as good as it gets for ride quality, especially paired with a B&W Companion. That rotating head plus…

view full answer...

Answer 12

Hello Steven, You will want to use a 3 1/2" bit as you need a 3 1/2" hole for the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs #BWGNRK1320. I attached an image where it goes over the size…

view full answer...

RV Storage Cover Recommendation for 2026 Brinkley Z3100

Product Page this Question was Asked From

Continue Researching