Throw this storage cover over your fifth wheel to protect it from rain and snow while you're storing it in between camping trips. Cover wraps around the bottom corners and secures with integrated straps so it won't flap in the wind.
Features:
Specs:
You're worried about your fifth wheel toy hauler getting wet and dirty in storage before your next trip. Whether you're storing your fifth wheel in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your fifth wheel will be protected. When you keep your fifth wheel covered, you are less likely to need to wash and wax it in between trips. And if you want to trade your fifth wheel in for a newer model later down the road, this cover will help maintain that resale value.
The 3-ply SFS AquaShed top panel reduces moisture buildup that can damage your fifth wheel over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your fifth wheel. And when the rain stops, the fabric dries quickly to minimize the development of mold and mildew. The top panel blocks the roof of your fifth wheel from mild sunlight as well, protecting the cover from cracking and fading.
How to Measure Your Fifth-Wheel Toy Hauler
To determine if this cover will work for you, measure the overall length of your fifth wheel from the very front to the rear bumper, making sure you're accounting for any spare tire carriers and ladders on the back. The cover isn't meant to fit over the kingpin of your fifth wheel, so don't include it in your measurements. Then measure the overall height from the bottom of your fifth wheel to the top. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.
Securing the Cover onto Your Fifth-Wheel Toy Hauler
The included ladder cap and rain gutter covers help prevent the cover from splitting on those areas of the fifth wheel so install those first. Then unroll the cover and carefully spread it evenly around your fifth wheel, making sure you don't pull too hard and tear the fabric. The cover is labeled with "front" and "rear" to help you position the cover correctly on your RV.
Wrap the elasticized hem around the bottom corners of your fifth wheel and pull on the cinch ropes on the front and rear of the cover. These remove any excess slack in the material, especially if your fifth wheel is slightly shorter in length. Then toss the weighted straps underneath your fifth wheel to the other side and buckle them together, which keep the cover secure on your fifth wheel and prevents it from flapping in the wind and damaging the paint job.
And if you still need to winterize or if you need to access one of the cargo compartments, you can use the zippered panels on the passenger's side to easily access the interior of your fifth wheel without having to completely remove the cover. You can also unzip the entire panel on the back so you can load and unload gear into your fifth wheel.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.