Fit of Super Springs SSR-313-54 For Rear Axle of 2014 Ram ProMaster 2500

Question

Question:

Hello team. Is this for 2014 RAM Promaster 2500 159WB Super Springs Custom Helper Springs Kit - Rear Axle - Heavy-Duty - Commercial 2014 Ram ProMaster 2500 If the kit contain 2 SumoSprings

asked by: Pedro P

0

Expert Reply:

The Sumo Springs Custom Helper Spring Kit you mentioned, part SSR-313-54 is indeed a fit for the 2014 Ram Promaster Van. The kit contains two springs for the rear axle. The springs themselves are rated up to a 2800 lb capacity, but be aware that the springs will not increase the existing capacity of your rear axle.

expert reply by: Mike L

0

Wayne J.

4/20/2020

I have a Sherry Nine passenger conversion van, On the Ram Promaster 2500 chassis. Which ones do you recommend?

Chris R.

4/21/2020

I can absolutely recommend the best suspension enhancement for your conversion van. Can you first tell me the model year of the ProMaster?

Wayne J.

4/22/2020

9 Passenger Paul Sherry Conversion Van on a 2019 2500 Ram Promaster

Chris R.

4/23/2020

Thanks! For your conversion van the Super Springs # SSR-312-54 will work perfectly on the rear axle to beef up the support and give you a much more stable ride.

Answer 1

Hey Chris! Even without towing or hauling heavy loads you're going to have a lot of extra weight from that conversion. The best option is going to be the higher rated SumoSprings Solo Custom Helper Springs #SSR-313-54. The support from their…

view full answer...

Answer 2

Yes, you should add the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item #CSS-1195F to the front suspension on your 2021 Ram ProMaster 3500. These helper springs adjusts progressively to the weight of your load. I have linked a…

view full answer...

Answer 3

Hey Lenny, thanks for reaching out! We have 2 different colors of the SumoSprings Solo Custom Helper Springs that fit your 2023 Winnebago Solis Motorhome, and the colors are based off of the weight ratings assigned by SumoSprings rather than trying…

view full answer...

Answer 4

The RockyMounts HighNoon FC Bike Rack #RKY67RR is a good option but there can be limitations. If your fenders come down too far on the tire you still won't be able to mount it properly. I prefer the Hollywood Racks RV Rider Bike Rack for 2…

view full answer...

Answer 5

First you will want to check your 2,800lb SumoSprings Solo Custom Helper Springs #SSR-313-54 to determine if 2nd 1" spacer was installed with the springs. If you have both the 1" spacers you will want to remove the 1" spacer which…

view full answer...

Answer 6

Hey Charles, we have a yellow set of SumoSprings that fits your 2022 Ram ProMaster 1500 with the part #SSR-313-54. Are you trying to gain a little more stability?

view full answer...

Answer 7

Hey Terry, great question and I’m glad you’re checking on this since that lift does change things a bit. The SumoSprings you’ll want is part #SSR-302-54, and this kit does come with a 1/2 inch spacer. SumoSprings recommends having no more than about…

view full answer...

Answer 8

Hey Juan, good question. With a 955 lb tongue weight and a 34' trailer, I’d steer you toward the 1,500 lb SumoSprings. Even with a weight distribution hitch helping spread that load, you’re still putting a good amount of weight on the rear…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Happy to help Bryan, glad you reached out! Together, these three components will give you a complete 7 way trailer wiring system with an electric brake controller for your ProMaster. Curt Powered Tail Light Converter #C56190KIT is the 4 way trailer…

view full answer...

Fit of Super Springs SSR-313-54 For Rear Axle of 2014 Ram ProMaster 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching