Replacement Bearings & Seals For A 2025 Brinkley Z3300 With Curt TCS Axles
Published 07/21/2026
Products Featured in This Question
Question:
I am checking to see if you carry axle bearing kits bearings, races, seals for Curt TCS axles: 2025 Brinkley Z3300 MFG: Jan 2025 Timken bearings preferred Dexter or National seals preferred
asked by: JERRY D
Expert Reply:
Hi Jerry!
We have your 2025 Brinkley Z3300 with those cool Curt TCS axles covered! I did some looking and the Z3300 comes with 8K axles, so you will need the following bearings:
Timken Replacement Trailer Wheel Bearing - 25580 # TMK44FR
Timken Replacement Trailer Wheel Bearing - 02475 # TMK75FR
We don't carry National seals, but I do have what we have listed below (Timken, Dexter, and Lippert):
Timken Grease and Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 452920/482920 # TMK98ZR
Dexter Grease Seal for 12" x 2" Hubs - 2.25" ID - 3.376" OD - After 1998 - Qty 2 # DX72UR
Lippert Unitized Oil Seals - ID 2.25" / 3.376" OD for 5,200-lb to 8,000-lb Axles - Qty 2 # LC75VP
All of these parts will fit 8K axles and the Curt TCS axles use the same spindles a standard 8K axle uses, so no worries there. The Lippert and Dexter seals come as a pair, but the Timken comes as a single seal. The Timken bearings are also sold as single bearings.
Where have you taken your Brinkley so far? And how do those Curt TCS axles ride? They are still fairly new to the market and I'm definitely curious about them.
Product Page this Question was Asked From
Timken Grease and Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 452920/482920
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- Timken
more information >
Continue Researching
- Shop: Lippert Unitized Oil Seals - ID 2.25" / 3.376" OD for 5,200-lb to 8,000-lb Axles - Qty 2
- Search Results: 276712
- Search Results: 20210952821
- Search Results: 4000 lbs trailer leaf springs
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" - Black
- Shop: Replacement U-Bolt w/Nuts for 5,200-lb, 6,000-lb and 7,000-lb Trailer Axles - 9/16" Diameter
- Q&A: What Ohms Should Trailer Brake Magnets Be?
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Video: Redline Trailer Suspension 176500 Review
- Q&A: Who Manufactures 8,000 etrailer Leaf Springs
- Q&A: Trouble Uncoupling Trailer From Tow Vehicle
- Video: Roadmaster Quick Foot Assembly Tongue Jack Extender Spec Review
- Video: A Closer Look at the Bulldog Round, A-Frame Jack Drop Leg and Pull Pin Assembly
- Video: Replacement Foot for etrailer or Ram Electric Jacks Review
- Video: Checking Out the Replacement Foot for etrailer or Ram Electric Jacks
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 452920/482920
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Video: Valterra Trailer Jack Stand: The Breakdown
- Search Results: trailer brakes
- Shop: Brake Controller
- Search Results: trailer leaf springs
- Search Results: trailer suspension parts
- Search Results: trailer hubs and drums
- Q&A: Timken Double Lip Grease Seal To Replace Grease Seal # GS-2250DL
- Q&A: What is Difference Between TruRyde and Timken Grease Seals
- Q&A: How to Correctly Position Oil/Grease Seal in Trailer Hub
- Q&A: Replacement Bearings for 2021 Grand Design Momentum 320G With 7k Dexter Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
on Trailer Bearings Races Seals Caps
