Product Experts Available Now!
Call 1-800-940-8924
Replacement Foot for etrailer or Ram Electric Jacks - Qty 1
(51 reviews)
Price: $17.82
In Stock
etrailer
Replacement Foot for etrailer or Ram Electric Jacks - Qty 1
Part Number: EJ-3520-FT
In Stock
$17.82
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (51)
- Q & A (0)
- Videos (2)
- Photos
etrailer Accessories and Parts - EJ-3520-FT
- Camper Jacks
- Trailer Jack
- Jack Foot
- etrailer
Replaces the foot for your etrailer or Ram electric jack (EJ-3520-BBX or EJ-3520-WBX).
Features:
- Replaces the foot for your etrailer or Ram electric jack (EJ-3520-BBX or EJ-3520-WBX)
- Quantity: 1 replacement foot
EJ-3520-FT Replacement Foot for etrailer or Ram Electric Jacks - Qty 1
Replaces EJ-3500-FT
Video of Replacement Foot for etrailer or Ram Electric Jacks - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Replacement Foot for etrailer or Ram Electric Jacks Review
What's up everybody It's AJ with etrailer.com. Today we're gonna be checking out this replacement foot for your Ram Electric jack. This foot plate is gonna be a direct replacement for the one that came with your electric jack. So it's gonna be the same size. It's gonna be five and a half inches in diameter. So it's gonna have a zinc coating so don't worry about rust or corrosion.
The foot plate is gonna be good for that gravel or dirt or soft ground so it doesn't sink down into it. It's gonna get a good footprint to keep your trailer up and out of that. How hard is it to install It's not that bad. Check out how I did it. It's gonna be pretty simple to install our foot plate.
We're missing one on this jack right now. So we're just gonna slide it up into position. Make sure you match the groove with the groove in the bottom of the jack and let's find out where you wanna place it. So we're gonna use the third hole up and I'll put our pin and clip back in. Doesn't come with the pin clips so you'll have to get that separately.
Now the foot plate's replaced, we can lower the jack. With the foot replaced, the jack's good to go. I really like that this Ram jack has so many options of replacement parts for it so that if something breaks, I don't have to buy a whole new electric jack and install that. Lost the foot plate or it broke Just replace with another one. Same with the casing up top, and even the switches on the front can be replaced.
So I know I can use this same setup for a very long time. I think that does it. Thanks for hanging out, and hope this helps..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
Ratings & Reviews
4.8
51 reviews
by:
Rich S
07/29/2026
I used this to replace the wheel on my tongue jack on my nuCamp Tab 360 teardrop camper. This is soooo much better than the wheel that came with the camper, which I never use to move the camper around. Much more stable and I can leave it attached to the tongue jack and have plenty of clearance below when hitched up. It is well built, actually nicer quality beefier looking than the photos on the website. It has a full-circumference weld at the base plate. The length is just right, and the holes for 2-inch height adjustments work well. This is all you need! Fast shipping by etrailer.
by:
Donald
08/12/2026
It fit as advertised. I like that it is adjustable so I don't have to extend the jack as far. The jack is on my enclosed car trailer that I use behind my motorhome.
by:
Paul C
07/31/2026
Product looks and works great! Ashley @ ETrailer helped me with a shipping issue and was fast and easy to work with!
by:
Glenn
08/23/2026
Fast shipping and a great product
by:
Billy
04/13/2026
Was missing the foot on our camper jack. Upgraded to this foot and we’re very happy.
by:
Brad
01/03/2026
Fit perfectly on the electric Ram jack. Sarah was a great help with customer service. Will definitely be using etrailor for all my future needs!!
by:
John
06/11/2026
Fit perfectly
by:
Now how did I loose that?
08/03/2023
Fits perfectly- just as well built as the one that fell off along the Alcan. I now use a lag bolt, lock washer, and wing nut in place of the flimsy snap/coupler/clip that came with the jack.
Can't tell you how many trailer jack feet we saw along the Alcan and Alaskan highways- and couldnt find one in either Anchorage or Fairbanks to fit.
Can't tell you how many trailer jack feet we saw along the Alcan and Alaskan highways- and couldnt find one in either Anchorage or Fairbanks to fit.
by:
Dewayne
09/14/2025
Fit perfectly and had a longer stem than my original which made it more stable
by:
Frederick
05/07/2021
The product was satisfactory and, as stated above, works as advertised. I gave it 3 stars basically because the weld between the round base plate and upright tube was not fully continuous all the way around the base. I’m sure that the weld, as-is, is more than adequate but in my opinion it could have been a neater job. However, no problem because the drop foot functions as it is supposed to.
by:
Jeff
10/15/2025
Very happy with it, perfect fit.
by:
Tim
07/22/2023
The product is what I expected and was delivered early. However my complaint is that the snapper pin did NOT come with it nor did etrailer mention the pin was sold separately or even suggested these are often bought together. I had assumed the pin would come with the foot as you need them both.
So now I'm unhappy that I have to pay an extra $[XX] in shipping if I decide to order the pin from etrailer. The pin is $[XX] and the shipping is $[XX]!
So now I'm unhappy that I have to pay an extra $[XX] in shipping if I decide to order the pin from etrailer. The pin is $[XX] and the shipping is $[XX]!
by:
Charles L
09/11/2025
Arrived on time, and fit perfectly!
by:
Steve
07/08/2025
works just like the original, great fit, no problems
by:
Chris
07/08/2023
A perfect fit for my LCI power jack, and at a third of the price of an OEM replacement! Thank you!
by:
Jon
08/27/2020
Fast shipping! Thanks!
by:
Steven
05/22/2025
Everything went great
by:
Gaelynn
12/10/2024
My husband says that he is super happy!
Brooke M.
12/11/2024
Thanks for sharing that with us! Can you tell him we are so glad hes pleased with the replacement?
by:
ADW
07/11/2024
I like this, as it's a few inches longer than the one that came with our camper. Durable & sturdy.
by:
Deborah
06/29/2024
Great price. Excellent quality.
by:
Stan
09/20/2023
it's a well fabricated item.
by:
Roy
08/30/2021
Service was fast and the order was correct. I will use you again!!
by:
Thomas
04/21/2021
Nice looking didn’t realize it was Crome plated
by:
Sandrine
04/02/2024
We are very pleased with the product. It was delivered quickly and is exactly what we needed.
25
51
true
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- Jack Foot For etrailer Round A-Frame Trailer Jack TJA-5000S-BHi Morgan! The tube on the Dutton-Lainson Replacement Jack Foot # DL22542 is the exact same as the tube on the etrailer Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B, so it will not be a fit, unfortunately. That said, we have a few options you might be interested in and I have them listed below: Ultra-Fab Detachable Footplate w/ Pin for 2-1/4" Diameter Jacks # UF52FR etrailer Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks # JF-99 Replacement...
view full answer... - Diameter of Replacement Foot for etrailer or Ram Electric JackThe Replacement Foot for etrailer or Ram Electric Jacks # EJ-3520-FT has an inner diameter of about 1-1/2" and its outer diameter is 1-3/4" which is the measurement you'll need if you are looking for a replacement. This foot is designed to fit the Electric Jack # EJ-3520-BBX (Black) or # EJ-3520-WBX (White).
view full answer... - Looking For 2-5/16" Hitch Ball With 2" Rise And 1" ShankHello John, thanks for reaching out. We do not offer any 2-5/8" hitch balls, but we do offer a lot of 2-5/16" hitch balls, if that is what you are looking for. If you are looking for a standard hitch ball, we do have a 2-5/16" ball with a 1" shank like part # C40007 which has a 2-1/4" long shank. There is nothing with a 2" rise built into the ball though. With these, any desired rise/drop is achieved with the ball mount, not the ball. If you are looking for a gooseneck ball, we may...
view full answer... - Electric Jack Replacement Parts for a 2017 Jayco White Hawk Travel TrailerWhile we do not carry just the tube for your 2017 Jayco White Hawk Travel Trailer's electric jack, we do carry other replacement parts for the jack and full-on replacement jacks. As a full replacement, the etrailer Electric Jack - A-Frame, part # EJ-3520-BBX, can be used. I've linked to a video review of this jack for you to look at. There are other parts of this electric jack that we carry replacements for, including the Foot, part # EJ-3520-FT.
view full answer... - Recommended Replacement Drop Leg for a Bulldog Tongue JackIt won't because the grove in the leg is different enough that they aren't compatible, however I have another option that will. It is the Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack item # BD500190. This is an exact replacement part. The Replacement Foot for etrailer or Ram Electric Jacks item # EJ-3520-FT you were looking at will not work on your jack as it was designed to be use with the item # EJ-3520-BBX or item # EJ-3520-WBX jacks.
view full answer... - What is Foot Base Diameter of Replacement Foot for etrailer Jacks EJ-3520-FTHey Jeff, the diameter of the foot of the Replacement Foot for etrailer or Ram Electric Jacks # EJ-3520-FT is 5-1/2 inches. What jack are you wanting to install this on?
view full answer... - Looking for the Replacement Foot for a Lippert Tongue Jack 806200-RBHappy to help David, The replacement foot # EJ-3520-FT you were looking at is compatible with etrailer or Ram Electric Jacks The replacement foot you'll want for your Lippert 806200-RB is the Lippert Replacement Trailer Tongue Jack Foot Pad # LC165253. It is a direct replacement for Lippert power tongue jacks with a standard 2" round jack tube. Is your original foot pad the only part that's damaged, or are you also needing the retaining pin and clevis? What trailer do you use with the...
view full answer... - Replacement Parts Available for the eTrailer Electric Jack with FootplateIf you are referring to the Electric Jack w/ Footplate part # EJ-3520-BBX for black or part # EJ-3520-WBX for white then yes, we do have the correct replacement extend/retract switch and for this you will want to use the Replacement Power Switch for RAM Electric Trailer Jack part # EJ-3520-PSW. We also have several other replacement parts which I have attached for you below. Replacement Light Switch for Electric Trailer Jack with Footplate - part # EJ-3520-LSW Replacement Cap for Electric...
view full answer... - Replacement Foot for Ram Brand A-Frame Powered JackSince you have a RAM brand a-frame powered jack the correct replacement foot is the part # EJ-3520-FT.
view full answer... - Recommended Footplate For Bulldog Fulton Sidewind 14 5000LB A-Frame JackI have another option but the Replacement Foot for etrailer or Ram Electric Jacks # EJ-3520-FT you were looking at will not work on your jack as it was designed to be use with the # EJ-3520-BBX or # EJ-3520-WBX. Since your Bulldog Fulton Sidewind 14 5000lb A-Frame Jack uses a 2" tube you can use the Bulldog Detachable Footplate for 2" Jack Tube # BD018564 which is rated up to 5000lbs. I included a video of the Bulldog # BD018564 for you to take a look at.
view full answer... - Replacement Foot for etrailer 3,500 Electric Jack Part # EJ-3520-BBXWe have a number of replacement parts for the Electric Jack w/ Footplate part # EJ-3520-BBX. I am not totally sure what you are referring to as the bottom plug but if it is the footplate, we have this available using the Replacement Foot for etrailer or Ram Electric Jacks part # EJ-3520-FT. If this is not what you are referring to them please just let me know or send a photo pointing out what you need replaced.
view full answer... - Is the Footplate on the etrailer.com Trailer Jack e49ZR Removable?The footplate/drop-leg is indeed removeable on the etrailer.com Electric Jack w/ Footplate - A-Frame - 25-1/2" Lift - 3.5K - Black # e49ZR. Said footplate ( # EJ-3520-FT ) is held in place with a snapper style pin ( # JFC-PN ), both of which are easily removed. As a side note, if you wanted to remove the # EJ-3520-FT to add a wheel of some sort, I can suggest the Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs # JC-102. This will fit around the tube and will also...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Andrew K
Installed by:
Kathleen M
Installed by:
Cole B
Installed by:
David F
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Chris R
Written by:
Shelly K
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Noah M
Video by:
Jonathan Y
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Now T.
8/4/2024
Still BOLTED on and easy to remove when needed, not that I will be taking it up the ALCAN again.