Trouble Uncoupling Trailer From Tow Vehicle
Updated 06/24/2019 | Published 06/22/2019 >
Question:
When i try to unhook the camper after leveling it side to side, i have a hard time getting the camper off the ball. It goes up so far and stops. I have a 2005 Forest River Grand Surveyor GS260, and am using a 2 5/8 ball. Any suggestions. We are new to camping, so really dont have a lot of experience.
asked by: Rick M
Expert Reply:
Generally speaking, most people will uncouple the trailer before they extend the stabilizer jacks so that is what I recommend first. That said, if you are having trouble getting the trailer high enough to release the hitch ball from the coupler then you would just need to use a stand of some sort like the Valterra Trailer Jack Stand part # A10-0900 which offers another 8" or so of lift.
If the trailer lifts the hitch ball on the vehicle when you raise it then you may need to jump up and down on the bumper in order to get it to release. Also, it would be a good idea to apply hitch ball grease part # 58117 after each use.
Product Page this Question was Asked From
Valterra Trailer Jack Stand - Polyethylene - 8-5/8" Diameter x 8-3/8" Tall - 5K
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Blocks
- 4001 - 5000 lbs
- Free-Standing
- Valterra
more information >
Continue Researching
- Shop: Lippert Unitized Oil Seals - ID 2.25" / 3.376" OD for 5,200-lb to 8,000-lb Axles - Qty 2
- Q&A: Replacement Bearings & Seals For A 2025 Brinkley Z3300 With Curt TCS Axles
- Search Results: 4000 lbs trailer leaf springs
- Search Results: 20210952821
- Search Results: 276712
- Video: Checking Out the Replacement Foot for etrailer or Ram Electric Jacks
- Video: Replacement Foot for etrailer or Ram Electric Jacks Review
- Video: Roadmaster Quick Foot Assembly Tongue Jack Extender Spec Review
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" - Black
- Shop: Replacement U-Bolt w/Nuts for 5,200-lb, 6,000-lb and 7,000-lb Trailer Axles - 9/16" Diameter
- Video: An In-Depth Look at the Camco Trailer Tongue Jack Stand
- Video: Valterra Trailer Jack Stand: The Breakdown
- Video: Review of the Camco Trailer Tongue Jack Stand
- Shop: Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc
- Shop: Roadmaster Quick Foot Assembly Tongue Jack Extender - 6" Extension - 5,000 lbs
- Shop: Replacement Foot for etrailer or Ram Electric Jacks - Qty 1
- Shop: Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks - 4" Extension - 1,600 lbs
- Q&A: Who Manufactures 8,000 etrailer Leaf Springs
- Q&A: What Ohms Should Trailer Brake Magnets Be?
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Search Results: trailer lights
- Search Results: trailer leaf springs
- Search Results: trailer brakes
- Search Results: trailer hubs and drums
- Q&A: How Much Height Does Valterra Trailer Jack Stand Add?
- Q&A: Recommended 2" Double Ball Mount that Adjusts in 1-1/2" Increments
- Q&A: Is There a Version of the Andersen Weight Distribution System that Has 2-5/16 inch Ball
- Q&A: Recommended Trailer Tires to Replace 235/75R15 Tires
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps

