Fold-Away Coupler Hinge For 2x3 Trailer Tongue
Updated 05/07/2019 | Published 05/05/2019
Question:
I have a 24ft Tritons trailer and it is 2x3 what would I need to make it a folding trailer
asked by: Tim
0
Expert Reply:
I recommend using the Fulton Fold-Away Coupler Hinge kit part # FHDPB230101 that fits a 2"x3" trailer tongue. It comes with all the hardware needed to install. Please keep in mind the trailer tongue material thickness must be between.188" and.120" to use this product. I have attached a diagram that explains where to install the fold-away and a video for your reference.
expert reply by:
Heather A
0
click to enlarge
click to enlarge
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Bolt-On
- 5000 lbs GTW
- 2 x 3 Inch Tongue
- Fulton
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: SwingKing Bolt-On Swing Tongue Kit - 3x5 - Black Powder Coat
- Shop: SwingKing Bolt-On Swing Tongue Kit - 3x5 - Galvanized
- Search Results: hitch covers
- Shop: Fulton Fold-Away Coupler Hinge Rubber Plug Kit
- Shop: Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Tongue - Weld On - Up to 5,000 lbs
- Video: Review of CE Smith Boat Trailer Parts - Frame Strap - CES68JR
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement U-Bolt Kit, Leaf Springs, Bolts and Shackles for 68 Aristocrat Lo Liner Trailer
- Q&A: Replacement 1-1/2 Inch Square Axle for a Boat Trailer
- Shop: CE Smith Frame Straps - 2-1/2" Hole to Hole Length - Galvanized Steel - Qty 1
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Video: Hands-On with the CE Smith Trailer Suspension Shackle Straps
- Video: All About the U-Bolt Plate
- Video: Review of CE Smith Trailer Suspension Parts - Spring Seat 3500 lb 2 Inch Square Axle - CES28WR
- Q&A: Availability of a Slipper Spring with Radius End and 1,500LB Axle Capacity With a Length of 26"
- Q&A: 1,000 lb Slipper Spring Recommendation for John Boat Trailer
- Q&A: Tires Wearing On One Side Of Trailer with E-Z Flex Equalizers Installed
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Q&A: Where Should a Slipper Spring Sit on the Hanger Bolt of My Suspension
- Video: Review of Redline Trailer Suspension Parts - Hangers - 28-68-4
- Video: All About the 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles
- Video: Review of MORryde Trailer Suspension Parts - Shackle Upgrade Kit - MR89ZR
- Search Results: fulton
- Search Results: aluminum fenders
- Search Results: trailer suspension parts
- Article: Trailer Wiring Diagrams
- Search Results: trailer leaf springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Explore Expert Info
![Our Expert]()
on Folding Trailer Tongue
on Folding Trailer Tongue
