Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for Class A motorhomes with HWH and Atwood leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.
Features:
Specs:
Check the listings below for some of the most common rigs that are compatible with this system. Note: You will need to measure your jacks to confirm compatibility, as the foot size/shape of the jacks on your leveling system can vary from model to model and year to year.
SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.
Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Customer Satisfaction Score:
67% were satisfied with this product
33% of customers were not satisfied
Ratings & Reviews
After 3000 miles and 9 months of use, the pads are performing well, especially
when in a friends asphalt driveway and not wanting to leave jack imprints. Installed on 2011 41' Tiffin Phaeton.
We've had them 4 years and love them. Not had one come loose yet. Travel ~3 months per year, up to 8,000 miles/year. Been to LOTS of un-level camping spots, no problem.
They do collect some rocks on top, so clean'em off occasionally!
2010 Tiffin Phaeton 36QSH. Had to cut small notches in all pads so they would sit flat when retracted. There is a 3" wide C channel that sits above each leveler foot on the inside of each leveler. If you don't cut notches the pads fit but hit the C channel when retracted and makes them sit at an angle and one side sits low. With levelers up I held pads up and marked where to notch to clear C channel. Cut notches with grinder, made a big mess but worked well. Now leveler pads sit flat when retracted and not low on one side.
Second time ordering Snap Pads. New to us RV came stock. Put these on in a few minutes. Nice way to keep the landing gear damage free.
Awesome sure beats getting underneath the motorhome setting up your pads every can spot
Really like these, had them on our last RV and wanted them for our new to us RV. Having a bit of an issue installing not because of the product but because our 1998 jack pads are not quite flat like they should be.
Such a great upgrade for my Leveling system. I can easily level on any surface now. Thank you, etrailer, your TEAM has extraordinary communication!!!
These are simple to install and, although after only one test, seem to be pretty secure while driving. Now helping to widen the weight distribution great for softer underlayment while cushioning the feet on the harder as shown in the pictures.
Seems very good quality and fairly easy to install
The pads fit perfectly. Stable and soft on the concrete pad.would definitely recommend.
Work as expected. Money well spent
Excellent product. Installation was a snap. Also appreciate the quick delivery. Y'all do good work!!
We put the pads on our 2000 Fleetwood Southwind they work great on all surface without sinking in.
They are a great improvement for all motorhome and Rv.
These pads are great! And as always etrailer is the best price with free shipping. I’m a happy camper!!
A must have add on, saves worry about slipping on concrete also provides a larger footprint for softer ground, I seldom use any blocking.
Wayne
6/11/2024
Working very well, we are fulltime and they are great on any surface, extra traction on concrete and asphalt and extra surface area for softer conditions.
I am sure that this is not the fault of the product, but our pads will not snap onto the feet of our jacks. The jack feet sit ON the pads, but will not snap into the groove. I am sorry, but we will have to return these.
Jenny N.
3/28/2023
I would like to see if I can help. Would you be able to send a picture? Do you have a HWH or Atwood leveling system with 10-inch round feet? We have had Snap Pad recommend lifting the jack foot up 3-4 inches and using a shim to pry the corner of the pad up and help as the jack foot comes back down, sort of like using a shoe horn to get your foot into a shoe.
J
3/29/2023
Thank you for your reply and suggestions. We have tried using soap on the rim of the pad to get the foot to slice in easier to no avail. We are currently out on a trip but will be back home by Sunday. The feet on our HWH system have slightly raised lips they are not dead flat like shown on the Snap Pad site We will try using a block to lift up one side of the pad so that it might slide in better like using a shoe horn as you suggested. My wife is concerned that one of the feet is a little bent and will not fit into the pad so I was going to use a block on that pad anyway. We will try to get the pads to snap on when we get back home...will keep you posted.
Easily installed by two 70 year olds. Hardest part was getting up -L
OL. Work great as always. Great support from etrailer. Thanks!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Karri
7/21/2023
One year later, no issues. Works just as good as day 1.