Will Furrion Vision S + Camera System Work with 2024 Chevy Silverado 2500 with 2021 Imagine XLS

Question

Question:

I have a furrion vision s 4.3 back up camera that I used on a 2021 Imagine Xls, and it worked fine while towing with my 2024 Silverado 2500. I am switching it to my new 2026 Imagine 2600rb. I have heard of the need for an adapter to deal with PWM , but it did not happen with the above listed truck . So is the issue with the Vision S+ ? I ask because I was considering upgrading to that camera, but don’t want to have to add the adapter.

asked by: James W

0

Expert Reply:

Hey James, the need for an adapter with the Furrion Vision S camera systems is based on the truck that is being used and not the trailer. So if your current Vision S system is working with your Silverado then the Vision S + part # FR39DF would also work with your truck and the new camper. How did you like the Vision S?

expert reply by: Jameson C

0

James W.

7/9/2026

Thanks for the information. We like the Vision S, although at our age it is a little dim especially in bright sunlight.

Jameson C.

7/9/2026

@JamesW I checked with Furrion and the Furrion Vision S+ is noticeably brighter and provides a much sharper picture than the older standard Vision S or Vision 1/2 models. This is due to the upgrade to 1080p high-definition cameras and improved monitor anti-glare, high-resolution panel technologies. So long story short the S+ will be a nice upgrade for you.

Answer 1

Hey Garth! The camera systems have come a long way in 10 years and they definitely work well and are reliable. I recommend the latest generation from Furrion, the Vision S+ #FR57AD. The Vision S+ gives you a real-time view using a 2.4 GHz signal and…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Will Furrion Vision S + Camera System Work with 2024 Chevy Silverado 2500 with 2021 Imagine XLS

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching