Looking for Thomas Payne RV Jackknife Sofa Near 76 inches Wide

Question

Question:

I have an 07 Freightliner Coronado ARI sleeper and there was a jackknife bed installed in it. I need the entire new jackknife bed. My base measures 76 inches outside to outside. Could somebody please contact me

asked by: Thomas R

0

Expert Reply:

Hey Thomas, the closest jackknife sofa to what you have now would be the Thomas Payne RV Jackknife Sofa w/ Hinges # TP66KR which is 74 inches wide. Do you have to have it right at 76 inches or just something close to that?

expert reply by: Jameson C

0

Jackknife Sofa
(click to enlarge)

Answer 1

Hey David, the Thomas Payne RV Jackknife Sofa #TP66KR is installed you would want to have it right at about 3 inches from the wall behind it so that it can fold down without hitting the wall. How much clearance do you have for this and what RV are…

view full answer...

Answer 2

Hey Robert, we do have steering stabilizers that fit your 2022 Thor Chateau M25 350. We have the Roadmaster Exact Center part #RM47MR and the Safe-T Plus part #ST98MR which will both work great. Neither is a bad option but I really like the Safe-T…

view full answer...

Answer 3

For your 2019 Entegra Odessy 26D Class C motorhome, I recommend using the SumoSprings Solo Custom Helper Springs #SSR-130-47 for the rear axle, and the SumoSprings Solo Custom Helper Springs #SSF-106-40 for the front axle.

view full answer...

Answer 4

Based on the chassis and your weight of your 2012 Ford E-350 cutaway chassis the SumoSprings you'd want the part #SSR-106-47-1 which has a 4,600 lb capacity. The part numbers you mentioned are for a truck chassis.

view full answer...

Answer 5

Hi Jeff, I can give you a hand here with suspension upgrades for your 2023 Jayco Greyhawk 27U, though honestly I'd go a different route than the Timbrens #TFEF350 and #TFERSD you mentioned. They'll do their job, but my goodness they can be…

view full answer...

Answer 6

Hey Roy, thanks for the pictures. The 72" measurement on the Thomas Payne RV Jackknife Sofa item #TP88KR is the distance from the outside edge of the brackets. The actual sofa portion is 69" wide. How wide of space are you working with on…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Looking for Thomas Payne RV Jackknife Sofa Near 76 inches Wide

Product Page this Question was Asked From

Continue Researching