Full Dimensions of Thomas Payne RV Jackknife Sofa

Question

Question:

Do you know the full dimensions of the Thomas Payne RV Jackknife Sofa w/ Hinges, Hardware - Fold Down - 74inch Long? Im looking for a width in both the folded up sofa configuration, and the flat bed configuration.

asked by: Jason

0

Expert Reply:

Hey Jason! When the Thomas Payne RV Jackknife Sofa # TP66KR is in the sofa configuration it is 20" deep/wide. When it is folded down into a bed that same measurement is 41".

Did your old couch wear out or are you looking for an upgrade?

expert reply by: Robin H

0

Thomas Payne RV Jackknife Sofa
(click to enlarge)

Answer 1

Hi Donald; is it like a jackknife sofa without legs sitting up on a riser? The Thomas Payne RV Jackknife Sofa w/ Hinges, Hardware - Fold Down - 74" Long - Funhouse Silver #TP66KR matches that length and is designed to sit on an existing riser or…

view full answer...

Answer 2

Hey David, the Thomas Payne RV Jackknife Sofa #TP66KR is installed you would want to have it right at about 3 inches from the wall behind it so that it can fold down without hitting the wall. How much clearance do you have for this and what RV are…

view full answer...

Answer 3

Hey Thomas, the closest jackknife sofa to what you have now would be the Thomas Payne RV Jackknife Sofa w/ Hinges #TP66KR which is 74 inches wide. Do you have to have it right at 76 inches or just something close to that?

view full answer...

Answer 4

Hey Roy, thanks for the pictures. The 72" measurement on the Thomas Payne RV Jackknife Sofa item #TP88KR is the distance from the outside edge of the brackets. The actual sofa portion is 69" wide. How wide of space are you working with on…

view full answer...

Answer 5

Hello Sue, thanks for reaching out. For that Thomas Payne RV Jackknife Sofa #TP26KR, the cushions are made from high-density foam, not springs or air cores. That foam is built to be pretty firm so it can work both as a seat and as a sleeping surface…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 12

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Full Dimensions of Thomas Payne RV Jackknife Sofa

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching