Does The TowSmart Plug-In Brake Controller Wiring Connector TS56RR Fit A 2019 Chevy Tahoe?

Question

Question:

Does the 9538 Tow Smart Plug-In Simple Brake Controller Wiring Connector - Chevrolet/GMC fit a 2019 Chevy Tahoe?

asked by: DJ M

0

Expert Reply:

Hey DJ, thanks for reaching out. Yes. The TowSmart Plug-In Simple Brake Controller Wiring Connector 9538 part # TS56RR is compatible with a 2019 Chevrolet Tahoe, provided the Tahoe is equipped with the factory tow package. It plugs directly into the factory brake controller port under the dash, so there's no cutting or splicing required.

Does your Tahoe have the factory tow package?

expert reply by: Jesse M

0

TowSmart Plug-In Simple Custom Wiring Adapter for Trailer Brake Controllers - Chevy/GMC
(click to enlarge)

Dj M.

7/8/2026

Yes, factory tow package with connector inside black junction box at the left side firewall/floor behind the parking brake pedal.

Jesse M.

7/8/2026

@DjM Ok perfect! That # TS56RR will be exactly what you need then. What brake controller do you have?

Dj M.

7/8/2026

Contemplating a TowSmart® Synchronizer - Light-Duty Trailer Brake Controller Model Number: 1436. Couldn't find a manual for it on the company's website though.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Does The TowSmart Plug-In Brake Controller Wiring Connector TS56RR Fit A 2019 Chevy Tahoe?

Product Page this Question was Asked From

Continue Researching