Looking for Replacement Parts for Extang Solid Fold 2.0

Question

Question:

I bought a used extang solid fold for a 2015 tacoma off a person but the bed rail brackets are missing. Can I order just the bed rail brackets that the lock clamp hook to?

asked by: Shaun T

0

Expert Reply:

Hey Shaun, it sounds like you might be looking for the cab clamp assembly which is part # EX1034. If not, I attached a parts diagram for a Solid Fold for you to check out and see which parts are available. Let me know if you see what you need and I'll see if we carry it.

expert reply by: Jameson C

0

Parts Diagram
(click to enlarge)

John L.

7/3/2026

the parts were exactly what i needed , thanks

Jameson C.

7/6/2026

@JohnL glad to help!

Answer 1

I do have a recommendation for you as we do not carry the PJ-01 stabilizers. Instead you might consider replacing your stabilizers with the much stronger Ark Drop Down Corner RV Stabilizer Jacks #AR34FR. This will include 2 jacks which are much more…

view full answer...

Answer 2

I have attached a page from the installation instructions for the Extang Solid Fold 2.0 Hard Tonneau Cover #EX83475-62. The page shows the parts that should be used with the rear panel you said blew off. You can look at the page to make sure all of…

view full answer...

Answer 3

Hey Jack! You can use the Kodiak Disc Brakes #KOD67FR as a replacement as long as you have a #84 spindle on that trailer. These use #L68149 inner and #L44649 outer bearings so you need to make sure that matches what you have now. If you aren't…

view full answer...

Answer 4

Hey Bryan, I would go with the Kenda Karrier KR53 part #KE72EV to use as a spare on your 2012 Jayco Jay Flight travel trailer. Its the correct size wheel and tire that you need, it's the Load Range D you need, and also is the best priced option…

view full answer...

Answer 5

I'm glad to hear that you received the Rear Tailgate Clamp, #EX31003005, for your Extang Trifecta 2.0 tonneau cover. I called Extang and discovered that they don't have any videos for replacing the rear clamp. But, they were kind enough to…

view full answer...

Answer 6

I spoke with my contact at Extang a while back about the install of the front clamp for Trifecta Cover part #EX1034 and he said that you need to disconnect the screws from the crossbow of the cover so that it will drop down and the cab clamp assembly…

view full answer...

Answer 7

For you 2019 Chevrolet Colorado with the Extang Solid Fold 2.0 the correct clamp that are closest to the cab is #EX42FJ. They come individually so if you need both sides you'll want to get 2. I'm not sure which latches you are referencing,…

view full answer...

Answer 8

I spoke with my contact at Extang about the install of the front clamp for Trifecta Cover part #EX1034 and he said that you need to disconnect the screws from the crossbow of the cover so that it will drop down and the cab clamp assembly will then be…

view full answer...

Answer 9

None of the methods are super easy. I'd recommend three though you have to remove hinges. This is least invasive, doesn't require cutting the cover, and also doesn't risk damaging cover.

view full answer...

Answer 10

I spoke with my contact at Extang regarding the removal of the existing cab clamp on your Trifecta Tonneau Cover. She stated that on the Trifecta covers, after you have removed the screws that hold the cross member in place, you will then need to…

view full answer...

Looking for Replacement Parts for Extang Solid Fold 2.0

Product Page this Question was Asked From

Continue Researching