Front Sway Bar Recommendation for 2025 Gulfstream 6327le Class C

Question

Question:

Hi. I have a 2025 Gulfstream 6327le Class C. I need a front anti sway bar for it, road master brand or whatever upgrade you think than Chevrolet basic part number. Thanks in advance.

asked by: Ben A

0

Expert Reply:

Hey Ben, since we know your 2025 Gulfstream 6327le is built on a Class C Ford E-350 chassis you would want the Roadmaster front sway bar part # RM-1139-176 as a confirmed fit. This will do a great job improving the handling and stability of the RV. Do you have an upgraded rear sway bar already?

expert reply by: Jameson C

0

Roadmaster Sway Bar
(click to enlarge)

Kent

7/1/2026

I have a 2032 sunseeker , E450... I did a lot to the suspension in the front ...I put in 13/8 "outside diameter roadmaster, sway bar made a big difference

Frank

7/1/2026

@Kent I put the upgraded anti sway 1 3/8 bar on my 2018 BT Cruiser 5316 which is 32 feet long on a E450 cutaway. It made a big difference. Reduced the sway when large trucks pass me. Also helped with crosswinds. I also install the Exact Center Steering Stabilizer. I am Happy with my purchase of both items.

Jameson C.

7/1/2026

@Kent glad it's working well for you.

Bernie

7/1/2026

Ben, I added the Roadmaster front seat bar to my 2018 Thor class C motorhome and it works excellent. Well worth the money. Bernie

Ben

7/7/2026

@Bernie thanks for the info. Take care.

Ben

7/7/2026

Hi Jameson, I forgot to include that is a Chevy Expess 3500 chassis, not a ford one. I don’t know if there’s a big difference. Thanks in advance.

Jameson C.

7/7/2026

@Ben Sorry about that. We only have rear bars for that chassis. Do you have an aftermarket rear bar already?

Ben

7/8/2026

@JamesonC Actually I am not sure if I have the rear aftermarket bar. So far I have not installed anything like that since I bought the RV. Would that fix the problem with swaying and getting sucked in by big rigs? TIA.

Jameson C.

7/8/2026

@Ben actually a better rear bar will make a bigger improvement than a front bar so that would be what I would recommend. Even if there was a front bar made for your vehicle I would have recommended starting with a rear bar. So for that I would recommend the part # RM-1109-173.

See All (9) Replies to Ben ∨

Answer 1

You want to have between a 1/2 inch to 1-1/2 inches of clearance between the Timbren and the contact point when the truck isn't under a load. To reduce the amount of space you can add a spacer #A25723-90AH00. This will likely solve your issue.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 11

Hey Ted, thanks for reaching out. I went out to our warehouse and measured the Dexter Light Box Guard #DX99VC. The oval cutout is indeed 6-1/2" long x 2-1/2" tall. The 2" side light is supposed to be just a clearance light for…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Front Sway Bar Recommendation for 2025 Gulfstream 6327le Class C

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching