Lube Plate for B&W Patriot 5th Wheel Hitch

Question

Question:

I purchased a B and W Patriot fifth wheel hitch from you a few years ago really good hitch. Will a 3/16” thick lube plate work on that hitch?

asked by: Bob F

0

Expert Reply:

Hey Bob! Yes, the Curt Lube Plate # 16721 will work with your B&W Patriot # BWRVK3255. B&W recommends using a 10" lube plate with their hitch, and this measures 10" in diameter and 3/16" thick so its exactly what you need.

What are you towing?

expert reply by: Robin H

0

Curt Lube Plate
(click to enlarge)

Bob F.

6/27/2026

Thank you

Robin H.

6/27/2026

@BobF you're welcome, happy to help!

Answer 1

Hey Marc, here's the best parts for what you have and what you are looking for. #MR87ZR MORryde CRE3000 cushioned equalizers for 33" wheelbase #MR46ZR MORryde heavy-duty 2-1/4" shackles, wet bolts and bronze bushings #e54SR 25-1/4"…

view full answer...

Answer 2

You are correct that Curt does manufacture the Mopar factory 5th wheel hitches, so you can use either the #C16722 (12" diameter) or the #16721 (10" factory lube plate) as a replacement. These are both 3/16" thick so they'll be…

view full answer...

Answer 3

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 4

Congrats on the new trailer! I recommend the Portable Power Watchdog Surge Protector with Bluetooth, WiFi, and Emergency Shut Down - 50 Amp item #HU62VR over item #HU92VR because of it's ability to automatically turn back on once the power…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Charles, since you are looking for a Goodyear tire size ST225/75R15 mounted on a wheel with a 6 lug wheel the part #GY97QB would be a really great option. This has the tire you are looking for mounted on a really nice aluminum wheel that will…

view full answer...

Answer 9

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 10

Hey Bob! Yes, the Curt Lube Plate #16721 will work with your B&W Patriot #BWRVK3255. B&W recommends using a 10" lube plate with their hitch, and this measures 10" in diameter and 3/16" thick so its exactly what you need. What…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

This is a great choice Joe and thanks for reaching out! Weigh Safe True Tow Weight Distribution Hitch #WS49MR would be a good match for your setup. Since your Grand Design toy hauler will have a loaded tongue weight between 1,300 and 1,600 lbs, this…

view full answer...

Lube Plate for B&W Patriot 5th Wheel Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching