Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 14" x 5-1/2" aluminum trailer wheel brings real durability with a gunmetal gray finish that resists rust. The machined face and open-spoke design give it a clean, modern look that instantly upgrades any setup. A clear coat on both sides protects against scuffs and scratches, keeping the wheel looking fresh trip after trip.
When you’re hauling serious weight, every detail counts. This wheel is rated for 2,200 lbs and built with steel inserts in the lug nut wells to keep it securely in place. Those inserts prevent the holes from wearing down over time and stop the need for constant retightening, so you can tow with confidence knowing your wheel stays tight where it matters most.
Saltwater, rain, or road grime—none of it fazes this wheel. The rustproof aluminum build means long life in all kinds of weather, and the finish holds up even after repeated exposure to moisture. It’s the kind of corrosion resistance you want when your trailer lives outside or near the water.
The details make it easy to match this wheel to your setup. It has a standard 5 on 4-1/2" bolt pattern, a 3.19" pilot diameter, and a 0 offset for straightforward alignment with most trailer hubs. Wheel bolt size is 1/2"-20, meeting DOT specifications for quality and safety you can trust on every haul.


1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is jeff at etrailer.com. Today, we're gonna take a look at this Americana 14-inch by 5 1/2-inch AM03 series Gunmetal Gray, Machined Aluminum Trailer Wheel with the 5 on 4 1/2-inch bolt pattern. Now, this aluminum wheel is very durable, lightweight, and rustproof. As we mentioned, it's the AM03 series wheel, which you can see is a five-spoke design, and it's in a gun metal gray finish. And if you notice on those spokes, it has a nice machined silver face on the edge of the spokes that provide a nice, bold, sleek look. The gun metal gray finish on this wheel is a bright finish, and it does have a clear coat finish on the front pan, even on the back of the wheel to protect it.
A few dimensions on this, we mentioned the diameter of this is 14 inches, and when you measure the diameter, you'll measure inside to inside. So basically if we take a tape measure, and if we go across, you'll be able to see there's your 14-inch diameter. The width on this wheel, we said it was 5 1/2 inches. And that's always measured inside to inside or bead seat to bead seat. And there's your 5 1/2-inch measurement for the width.
Now, the bolt pattern on this wheel is a 5 on 4 1/2-inch bolt pattern. And if you wanna measure the bolt pattern on an odd number of lugs like this one being in five lugs, what you need to do is you can pick any hole, but whatever hole you pick, you'll measure across to either one of the two holes across from it. But when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure to across from it. So center to the furthest edge. So on this one, it'll measure 4 1/2 inches.
So that gives you a bolt pattern of 5 on 4 1/2 inches. Now, the wheel lug size that you on this wheel is a 1/2-inch by 20. Weight capacity is 2,200 pounds. And one of the nice features I like about this wheel is if you look on the inside of the lug nut wells right here, you'll notice they put steel inserts in those lug nut wells. And the reason they do that is so when you tighten your lug nuts down, it keeps the wheel securely in place on the trailer hub, prevents those holes from elongating, wearing down, and of course, it'll eliminate the need for constant re-tightening of your lug nuts.
If you notice the center cap is not included, we do sell those separately if you do want one. When you buy the center cap to fit this, you wanna make sure it matches the diameter of this pilot hole right here. This pilot hole diameter is 3.19 inches. So when you buy the center cap, make sure you get one that is 3.19 inches in diameter. This wheel does meet the DOT, Department of Transportation specifications and the SAEJ 2530 standards. But that should do it for the review on this Americana 14-inch by 5 1/2-inch AM03 Series, Gun Metal Grade Machined Aluminum Trailer Wheel.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews

Heather A.
4/10/2026
Wow, those wheels look great on the horse trailer David. What kind of horses do you have?

Claire H.
6/10/2026
Those new wheels look spiffy! Thanks for sharing a photo with us!

Kate F.
2/11/2026
Wow Harold, those wheels look great! I love the color of your boat too! Where do you mainly take your center console fishing boat out at, and what are you mainly fishing for? We have a Ranger, and like to dabble in some local bass fishing tournaments at the Lake of the Ozarks and Mark Twain Lake here in Missouri.

Jerred H.
9/23/2026
That does look pretty good Brock! Thanks for sending in that picture! Let us know when you're ready to swap out the other wheels.

Kate F.
8/10/2026
Thanks for including the picture Carlos! New wheel looks great!

Brooke M.
4/11/2025
Wow they look awesome and what a trailer! Really glad to hear the love the wheels and that it was a smooth experience shopping with us :)

Mike L.
10/18/2026
The wheels look fantastic, thanks for the awesome photos!

Claire H.
7/6/2026
Thank you so much for your kind words! I'm glad you liked the notifications we send during the shipping process as well :)
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Nick S.
11/3/2025
They do look great with those tires mounted. I am glad we were able to get them to you quick. When spring comes what kind of trailer are you going to be putting these on?