Install Harness Recommendation for Tow Pro Liberty in 2025 Ford F-150

Question

Question:

I just received my redarc liberty controller with TPH-025 harness. Do you carry a harness to fit my 2025 ford f150 that will plug into existing plugs without having to cut and splice wiring? Thanks

asked by: Scott B

0

Expert Reply:

Hey Scott, the correct install harness for a Tow Pro Liberty in your 2025 Ford F-150 would be the part # 331-TPH-007 which we actually have as a kit with the Tow Pro Liberty as part # RED67CR for your truck but it sounds like you already have the controller.

expert reply by: Jameson C

0

Answer 1

Hey Andrew, we have just what you are looking for with the Redarc Tow Pro Liberty part #RED67CR. This is the best brake controller available and it comes with the correct custom install harness for your 2022 Ford F-150 as well for a simple install.…

view full answer...

Answer 2

Hey Andrew, we do have a replacement white lid for the Ventline Ventadome roof vent #V3094-601-00 with the part #BVD0449-A01. Did yours get broken?

view full answer...

Answer 3

Hello Alonson, thanks for reaching out. You’re not crazy, what you’re running into is a known fitment issue with some Ventline setups and the MaxxAir II style covers. Those built-in tabs can spread the mounting brackets just enough to put tension on…

view full answer...

Answer 4

If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part #BVE0108-03. This dome is designed to fit #V3092-601-00, #V3092-603-00, #V3094-601-00, #V3094-601-00C, #V3094-603-00, and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

Hey Bob. There's two possible locations for the brake controller port on your 2026 Ford F-150. The most likely one is on your dash behind the coin holder above the 4WD knob. It'll be connected to the back of the coin tray which is only…

view full answer...

Install Harness Recommendation for Tow Pro Liberty in 2025 Ford F-150

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching