Does etrailer Bearing Kit Come With Timken Bearings

Question

Question:

Hello, could you please tell me if the brand if bearings you sell for the 2022 reflection 337rls is made by Timken? Thanks, Leroi

asked by: Leroi S

0

Expert Reply:

Hey Leroi, welcome back! Our etrailer Bearing Kit # BK3-210 comes with generic bearings. For the same kit with Timken bearings you need the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal # TMK32VR.

Looking at the Grand Design parts site, it looks like you either have 5.2k or 6k axles on there now. The inner diameter of the bearings is the same from 5.2k-7k axles, but the outer diameter is different depending on the hubs. I recommend verifying this before getting the bearings.

The 6k kit # TMK82VR and 5.2k kit # TMK22VR are both different, and you want to make sure you get the right fit. If you can send me a picture of your axle tag I would be happy to check with Dexter and see which one is correct.

expert reply by: Robin H

0

Timken Bearing Kit
(click to enlarge)

Answer 1

That is a Timken seal with the part number 171255TC, so you can use the Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 1 #58846 as the replacement or you can get a pair with part #RG06-050.

view full answer...

Answer 2

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 3

Hey Cory, thanks for the picture of your axle tag! For a Dexter 6,000 lbs axle you'll need the Bearing Kit item #BK3-110. This kit includes inner and outer bearings, a grease seal, races, a cotter pin, and a washer. You'll need one per hub.…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Does etrailer Bearing Kit Come With Timken Bearings

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching