Looking for Bearing Kit for 2004 Kendon Single Rail Stand Up Motorcycle Trailer
Updated 05/19/2026 | Published 05/17/2026
Products Featured in This Question
Question:
I have a 2004 Kendon Single Rail Stand Up Motorcycle Trailer. Will the grease seals in the Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063 Spindles Part Number: BK1-150 fit my axle and hub? The bearings are the same but the grease seals for my trailer are listed as 125255UC. Thank you.
asked by: John A
Expert Reply:
Hey John, are you sure that is the grease seal part number you need? We carry a replacement with the part # 34823 but it is different from the # 10-19 which comes with the kit you referenced so if that is what you need you would need to piece together the bearing kit with the seal # 34823 and the bearings # L44649.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Q&A: Replacement For 125255UC Grease Seal
- Q&A: Replacement Bearing and Seal Kit for 2004 Kendon Motorcycle Trailer
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer jack
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Brake Controller
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer wiring
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Gooseneck Hitch
- Search Results: trailer leaf springs
on Trailer Bearings Races Seals Caps
Tom
5/19/2026
There should be a part number on the seal along with the bearing. E Trailer can cross reference the parts for you. They set me up with parts. Good luck!!