Curt Weight Distribution Recommendation for 2019 Jayco Jayfeather X213

Question

Question:

What weight distribution hitches do you recommend for a 2019 Jayco Jay Feather X213? Pulling this with a 2005 Nissan Armada LE. Thanks.

asked by: Daniel P

0

Expert Reply:

Hey Daniel, the best way to pick out a weight distribution system is to base it on the loaded tongue weight of the trailer. Since the GVWR of your 2019 Jayco Jay Feather X213 is 5,500 lb a system like the Curt TruTrack part # C95MJ would work really well since it has a tongue weight range of 400-800 lbs. Have you used weight distribution before?

expert reply by: Jameson C

0

Daniel P.

5/12/2026

Thanks- I have used a WD hitch before. Would this work as well? https://www.etrailer.com/Weight-Distribution-Hitch/Equal~i~zer/EQ37140ET.html?srsltid=AfmBOoqwINmpvV-qREqFCRsvpNwJPgA8Y4TzKLLTuMuxSMa88rjTiC-9AE0

Jameson C.

5/12/2026

@DanielP that one would be rated too high and would give you a harsh ride quality. Are you wanting a similar Equalizer?

Answer 1

Hey Steve, thanks for reaching out. We do have a good option for that. I recommend the following: - Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW #C95MJ It’s designed for lighter trailers with 500–800…

view full answer...

Answer 2

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 3

Hello Kevin, thanks for reaching out. The Curt TruTrack Weight Distribution System #C17500 must have the frame brackets placed 4" from the end of the spring bar. Placing them at 8.5" back will not work and it will cause the WD hitch to not…

view full answer...

Answer 4

Yes, this is normal. The Timbrens will engage first when you hook up the trailer and the weight distribution hitch will then work with the remaining sag. Just make sure you're not overloading your truck's tongue weight capacity and the weight…

view full answer...

Answer 5

The 3,000 lbs of additional suspension support that the Timbren kit part #TTORTUN4L can provide will make a big difference on your 2015 Nissan Frontier Crew Cab which this kit is confirmed as a fit for. This gives the rear suspension an additional…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 12

It sure will Bryan and thanks for the pics! The Rhino-Rack Roof Rack for Thule and Yakima Tracks item #Y01-140B-NT will indeed mount to your No Bo's Rhino-Rack tracks. The included quick release legs are going to drop right into your roof rails.…

view full answer...

Curt Weight Distribution Recommendation for 2019 Jayco Jayfeather X213

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching