Does Ramp of Kuat Piston ION E-Bike Rack Store on Rack When Not in Use

Question

Question:

Hi, where does the ramp store after loading? Will the work on Aventon Aventure 3 Step-Through Ebike with a rear fender

asked by: David V

0

Expert Reply:

Hey David, welcome back! The ramp of the Kuat Piston ION E-Bike Platform Rack # KU89SR that you referenced does not store on the bike rack. You'd need to put it in your vehicle when travelling. We have other e-bike racks like the Thule EasyFold XT part # TH903202 which does have the ramp store on the bike rack when not in use if that's your preferernce. What e-bikes do you have?

expert reply by: Jameson C

0

EasyFold
(click to enlarge)

Answer 1

Hey Glenn! The Kuat Piston ION E-Bike Platform Rack #KU89SR does not have a version that comes with lights out of the box. The lights are available separately as the Light Kit for Kuat Piston ION E-Bike Platform 2-Bike Rack #KU29SR. These are…

view full answer...

Answer 2

Hello Sadie, Thanks for writing in. For your 2021 Jeep Cherokee, I'd recommend going with a Class III hitch with a 2" receiver since you're planning to carry two e-bikes and may eventually tow a small boat trailer or lightweight camper.…

view full answer...

Answer 3

Hey Marc, sorry for the delay in getting back to you. I checked your question history and I don't see anything from a few weeks ago which can sometimes mean there was a typo in your email address and we sent it to wrong person. This rack has a…

view full answer...

Answer 4

Hey Guy, we do have a light kit for the Kuat Piston ION bike rack part #KU89SR with the part #KU29SR. Does your vehicle have a 4-way trailer wiring harness?

view full answer...

Answer 5

Hello Kelley, thanks for reaching out. While the Kuat Piston ION #KU89SR is a very solid rack, I have concerns about the rear fender on the Velotric Fold 2 Plus bike obstructing the wheel mount. With 20" wheels it would be pretty tight. The…

view full answer...

Answer 6

Hi Craig! We do have a potential option for you, but the Light Kit for Kuat Piston ION E-Bike Platform 2-Bike Rack #KU29SR will only fit the Piston Pro ION and Piston Pro X, unfortunately. With that said, check out the Curt Auxiliary LED Indicator…

view full answer...

Answer 7

Hey Tom, you can definitely use the Kuat Piston Pro part #KU89SR with your Veloctric Nomad 2X bike but you will need the fender strap kit part #KU43VR which was designed for bikes just like yours that have fenders. Check out the attached picture to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Joe. To connect the Parkit360 Force Electric Trailer Dolly item #PA46VR to your trailer's battery, you'll need the Bulldog Winch Front Wiring Kit item #BDW20025. The Bulldog Winch Front Wiring Kit item #BDW20025 has the same style…

view full answer...

Answer 10

Hi Grant, Thanks for the photo—and that's a nice boat! Based on what you've described, I do think adding a weight distribution system would be a great upgrade to your towing setup, especially for longer trips where you'll also be carrying…

view full answer...

Answer 11

Hey Chad, thanks for reaching out. That is a fair question because Yakima does not use the words “flat tow” on the OnRamp LX product page. What Yakima does state directly is that the 2" OnRamp LX is “RV Tested and Approved” at its full 80 lbs…

view full answer...

Does Ramp of Kuat Piston ION E-Bike Rack Store on Rack When Not in Use

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching