Replacement Fender for 2005 Lowe Boat Trailer

Question

Question:

Have a 2005 Lowe boat and trailer. the passenger side of the trailer had the fender torn off not happy. Do you have replacements for that. It had a step platform also on the fender and was/is made of plastic.

asked by: Don H

0

Expert Reply:

I was able to find some photos online for a 2005 Lowe Boat Trailer and it looks to use the Fulton Single Axle Trailer Fenders with Top and Side Steps like part # F008593. I am not sure which exact size or color you need but I have attached a full list of options below you just need to know the wheel diameter and color.

expert reply by: Conner L

0

Answer 1

We have trailer fenders that are designed specifically for the 13 inch trailer tire size like what you have like the Fulton part #F008583. I attached a picture that shows this fender installed on a trailer with a similar 13 inch tire size like you…

view full answer...

Answer 2

Hey Jeremy the distance between the mounting bracket slots of the fender part #HP33RR is 25 inches. These don't actually have mounting holes on top of the steps.

view full answer...

Answer 3

Hey Benjamin, the etrailer fender part #HP33RR that you referenced can be used on either the left or right hand side. Are you replacing one or two fenders?

view full answer...

Answer 4

Glad you asked Larry, I can help! Our etrailer Single Axle Black Plastic Trailer Fender #HP33RR w/ Top and Side Steps for 12" Wheels' have brackets that are sold separate. CE Smith Mounting Brackets #CE26061G-2 for trailer fender with…

view full answer...

Answer 5

In regards to the CE Smith Single Axle Trailer Fender part #CE19503, this fender is designed to be used with 13" diameter wheels. The manufacturer does not provide specific measurements of the opening inside but rather the size of wheel that the…

view full answer...

Answer 6

I went out to our warehouse to take a couple measurements on the CE Smith Single Axle Trailer Fender #CE19504 that you referenced. The inside arch between the two side steps measures 30-5/8 inches long. The step itself which I believe is what you…

view full answer...

Answer 7

There are a number of 40 inch fenders available for your Boston Whaler Nantucket Trailer, each of which is designed for single axle trailers with 13" diameter wheels. The CE Smith Single Axle Trailer Fender w/ Top and Side Steps #CE19503 is a…

view full answer...

Answer 8

I went out to the warehouse to measure the CE Smith fenders #CE19503. The opening of the wheel well is approximately 27.5 inches long. I also took a picture of the underside for you.

view full answer...

Answer 9

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…

view full answer...

Answer 10

Hello JT, thanks for reaching out. You are on the right track with your drawing. The etrailer Single Axle Trailer Fender #HP33RR are designed to be bolted on from the top of the step onto a bracket. These specific etrailer brand fenders are a new…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Fender for 2005 Lowe Boat Trailer

Featured Help Information

Miscellaneous Media

Continue Researching