Arch and Step Dimensions of CE Smith Single Axle Trailer Fender # CE19504

Updated 08/20/2019 | Published 08/19/2019

Question:

There are only a few dimensions listed on the website which unfortunately are not enough for me to make a good decision about purchasing this product. Inside the fender there is an arch comes down to a set of holes where bolts are placed horizontally to attach the fender to the metal supporting the steps. I need to know the length between the legs of this arch, because if it is too narrow, I wont be able to get the fender settled down enough to bot the fenders into the supports. I also need to know the dimension where these metal supports touch the bottom of the steps. Please see the attached photos for a better idea of what I need. Do you have a drawing with more dimensions? Thanks in advance for your cooperation.

asked by: Timothy R

Helpful Expert Reply:

I went out to our warehouse to take a couple measurements on the CE Smith Single Axle Trailer Fender # CE19504 that you referenced. The inside arch between the two side steps measures 30-5/8 inches long. The step itself which I believe is what you referred to as touching the bottom of the step brackets on your trailer measure just under 6-1/2 inches long.

I have attached a diagram to assist.

If these aren't the exact dimensions you were looking for or you need some additional measurements to help determine a fit please just let me know and I will be happy to take some more.

expert reply by: Chris R