Length of Wheel Well Opening for CE Smith Single Axle Trailer Fender w/Top and Side Steps 13

Question

Question:

What is the size of wheel well or what is the length of the wheel opening? Also, please show a picture of the bottom/underside of the fender. Thank you, George

asked by: George L

1

Helpful Expert Reply:

I went out to the warehouse to measure the CE Smith fenders # CE19503. The opening of the wheel well is approximately 27.5 inches long. I also took a picture of the underside for you.

expert reply by: Michael H

1

click to enlarge

Answer 1

Hey Al, I looked up your Boston Whaler trailer and it appears to have a fender like the part #CE19502-2 which is a pair of gray plastic fenders. But I wasn't able get a wheel size so hopefully you have a 12 inch diameter wheel as this is what…

view full answer...

Answer 2

The CE Smith Single Axle Trailer Fender #CE19502 is the one fender that we have that will fit the brackets that you have. This fender is only available in the gray color. The color is molded into the plastic so if you so choose you can replace both…

view full answer...

Answer 3

We have an option that is very close to a perfect replacement for your fender. It's the CE Smith Single Axle Trailer Fender w/ Top and Side Steps, part #CE19503. This measures 40-1/8" Long x 10" wide x 10-1/4" tall, making it only…

view full answer...

Answer 4

The M1 measurement for a trailer fender is the inside distance between the two mounting bracket slots of the fender. The CE Smith Fender part #CE19502 doesn't have those same cut outs like the Fulton fenders do so we don't have that…

view full answer...

Answer 5

The closest option we have available to the specs you mentioned is the CE Smith Single Axle Trailer Fender #CE19502. This round fender has an overall length of 37-3/8 inches, a width of 8-7/8 inches, a height inside the wheel well of 7-1/4 inches,…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

Hello Donald, The Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers – 15" to 16" Wheels – Qty 2 #CES74JR are constructed from 16-gauge nominal steel, offering a strong and durable solution for protecting your trailer from road…

view full answer...

Answer 12

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Length of Wheel Well Opening for CE Smith Single Axle Trailer Fender w/Top and Side Steps 13

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching