bing tracking image
Q & A Icon

Recommended HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs and How to Do Routine Maintenance  

Updated 04/25/2026 | Published 04/23/2026

Question:

HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 Part Number: LC182895 Hello, Could you give me any advise for maintaining these? mine has a lot of rust coming out of the spring housing. It has only been outside since November 2025. I dont see any way to grease the internals... Thank you

0

Expert Reply:

Hey Johnny, welcome back! The HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs item # LC182895 need to be cleaned with soap and water a few times a year. You'll also want to use automotive wax and lubricate the moving parts regularly and each time you clean them.

You'll need to unthread the hooks to grease the internals. It is also recommended to remove them while your camper is being stored for longer periods of time.

How do you have the HappiJac item # LC182895 orientated on your camper? Is the threaded hook facing up or down?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H
LC182895
LC182895
(click to enlarge)
John D. profile picture

John D.

4/25/2026

Hey thanks for the reply. After I submitted the question I found that the threaded part comes all the way out. I filled the internals with grease so we should be good now. The threaded hook is on the bottom. I’m using it in a salty coastal environment so I’ll have to keep up with it. Thanks again!

Jerred H. profile picture
Etrailer Expert

Jerred H.

4/25/2026

@JohnD You're welcome! Glad you got it sorted out. Happijac recommends installing the turnbuckles with the threaded hook up. They say it prevents water from accumulating in the barrel.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>