Recommended Suspension Stabilizer and Sway Control Kit for a 2013 Mercedes-Benz Sprinter 3500

Question

Question:

I have a 2013 Sprinter 3500 camper van airstream. Can I use the superSpring Custom part SS62KV? By the way, I found an installer near me. How much is the installation fee?

asked by: Leif T

0

Expert Reply:

Hey Leif. I checked with SuperSprings and the correct Custom Suspension Stabilizer and Sway Control Kit for your 2013 Sprinter 3500 is item # SS69PV. This system is designed to fit the 2WD and 4WD 2010-2026 Mercedes-Benz Sprinter 3500.

The SuperSprings item # SS69PV attaches to your Sprinter's rear leaf springs and is going to do a great job of keeping your rear end from sagging. It also helps reduce that top heavy swaying feeling.

As far as installation costs go, you'll need to get a quote directly from your local installer.

Do you tow a trailer or have a cargo carrier or a bike rack? What has you looking at suspension support?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

SS69PV
(click to enlarge)

Answer 1

Hello Greg, thanks for reaching out. Between the options you mentioned, I recommend going with the Hellwig Load Pro 25 Progressive Helper Springs with Custom Mounting Kit #HE64TR. Installation of the Hellwig kit and the SuperSprings kit are pretty…

view full answer...

Answer 2

Hey Pj! Those are not going to work together. The SumoSprings Solo Custom Helper Springs item #SSR-338-47 are going to mount in the same position on your axle and use the factory bump stop perch to attach. Out of those two options, I recommend the…

view full answer...

Answer 3

Hello Ed, I am sorry for the delay in response, we had quite the spike in questions recently. We do have the SuperSprings part number SSA56, it would be our part SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SS69PV which I am…

view full answer...

Answer 4

David, a set of SumoSprings is an excellent idea. I recommend going with the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SS69PV. These springs will work with both the 4WD and 2WD models, will reinforce your OEM suspension to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Mike, welcome back! Both the Firestone Ride-Rite #F2613 rated for 5,000 lbs, and the Firestone Ride-Rite Red Label #F2709 rated for 7,500 lbs will keep you at factory ride height when you aren't towing. All you need to do is run the air bags…

view full answer...

Answer 9

Hey George, congrats on the new truck! You are definitely going to need to support the axle when lifting your Silverado with the Pacbrake Alpha HD Pro Air Bag Suspension Kit item #PB25RV. Lifting your truck by the frame will stretch the bags too far…

view full answer...

Recommended Suspension Stabilizer and Sway Control Kit for a 2013 Mercedes-Benz Sprinter 3500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching